RC4WD Gelande II 1/18 Motor upgrade! Hey all. I found a way to mount a F 050 long can motor to the stock transmission!!! RC4WD puts a motor spacer/mount on there small motor that you can remove and FLIP over (so the holes mount up) to use on long can motors which seem to have the mount holes the other way. I used a stock ecx barrage long can with the stock motor mount flipped and that allowed me to install the ecx barrage motor exactly like the stock 030 motor! It fits perfectly and even with the bigger pinion the ecx motor came with, you still have plenty of torque and A LOT more speed. You will have to drill a small hole where the pinion is for clearance. And I’d use my stock pinion off the small motor but mine blew up and that’s how I figured this out. I feel like I have 20-30% more power with the long can motor and I think a 12t pinion that the barrage motor came with. Hopes this helps the few who have a mini RC4WD. https://uploads.tapatalk-cdn.com/201...4ef4854611.jpg I can still climb all the home made obstacles just fine. And others that I could not climb, I can now with the extra wheel speed. https://uploads.tapatalk-cdn.com/201...cef698bf6e.jpghttps://uploads.tapatalk-cdn.com/201...b5a7367f01.jpg Link to the motor with 12T pinion installed. https://www.ebay.com/p/Dynamite-Moto...p2047675.l2644 Sent from my iPhone using Tapatalk |
Re: RC4WD Gelande II 1/18 motor upgrade found! Cool find. I use those motors on all my micros. |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
Thank you. I’m not sure how I missed that motor adapter on it. I removed the motor from a r5 transmission I had purchased for my RGT 1/24 and I don’t remember seeing that motor plate. I only want the long can motors too. It seems silly to use the tiny ones. I like the 12t pinion the ecx barrage motor came with. But I think I might go back to a 10T as it’s almost fast walking speed. EDIT: I like the 12T with the long can motor more than I like a 10T pinion I also tried. Sent from my iPhone using Tapatalk |
Re: RC4WD Gelande II 1/18 motor upgrade found! Here is the motor plate. I found I like the stock barrage 1/24 motor with its 12T pinion the best. This motor with a 10T pinion was cool but I felt it was too much torque and not enough wheel speed. So buy a ecx barrage 1/24th motor. Leave it’s 12T pinion it comes with on. https://www.ebay.com/p/Dynamite-Moto...p2047675.l2644 Flip this motor plate and enjoy your much faster with plenty of torque RC4WD mini. https://uploads.tapatalk-cdn.com/201...c8adbf80e2.jpg Sent from my iPhone using Tapatalk |
Re: RC4WD Gelande II 1/18 motor upgrade found! Here is a video of how much faster the ecx barrage fr-050 motor is with the 12t pinion that comes attached to it is. https://youtu.be/UFz1CEIbSxQ Sent from my iPhone using Tapatalk |
Re: RC4WD Gelande II 1/18 motor upgrade found! I just want to say that rc4wd looks awesome with this wheels!Great tinkering btw. |
RC4WD Gelande II 1/18 motor upgrade found! Quote:
Thank you. Thats very kind of you. = ) They came off an HBX 2098b. They are not great performers. But now that I have wheel speed, they just spin till they win! = ) https://uploads.tapatalk-cdn.com/201...4afc84f51d.jpg Climbing up 55 degree. https://youtu.be/orHo_IvZRbY Sent from my iPhone using Tapatalk |
Re: RC4WD Gelande II 1/18 motor upgrade found! [QUOTE=BIGW0RM;5932592]Thank you. Thats very kind of you. = ) They came off an HBX 2098b. They are not great performers. But now that I have wheel speed, they just spin till they win! = ) Climbing up 55 degree. Hahaha!!! |
Re: RC4WD Gelande II 1/18 motor upgrade found! [QUOTE=bolo79;5933366] Quote:
BUT. The body was not on. And I was spinning the tires the whole way up. That wheel speed helps. Truth be told, with the body on, I hardly get up 45-46 degrees. https://www.youtube.com/watch?v=ygcPjgMWhBw |
Re: RC4WD Gelande II 1/18 motor upgrade found! Bigworm, none of those videos are availabe. Did you remove them by chance? |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
|
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
For $5 each why not, right? |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
While I love my RC4WD mini. It has so much drivetrain slop that I kinda like the RGT with the 12T pinion best. I figure if its not the best for slow controlled crawling because of the slop, I might as well make it a mud truck and just hammer down and mow shit over! WOO! Bronco POWER! "thumbsup" |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
|
Re: RC4WD Gelande II 1/18 motor upgrade found! You guys have me wanting to try and squeeze one of these into my SCX24... :twisted: |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
So I stuck the RC4wd 030 motor in my SCX24 and its got WAY more torque. It does not stall anymore. ANd I put 050 long can motor in the RC4WD Mini and used the motor plate the RC4WD mini had on its 030 motor flipped over so the 050 motor would install (030 and 050 motor mount holes are opposite of each other diagonally). I then put the 030 RC4WD motor in the SCX24 with and that was a very nice increase in torque on that. Id put a 050 in the SCX24 if I could. But I wasnt willing to try and drill new holes. And I have enough torque with the RC4WD motor and its smaller pinion to bend the SCX24's axle links when stuck. I feel its got enough power and control for me. In all of the above. It was simple like legos to put together. RC4WD mini = RGT 050 motor with the motor spacer plate flipped. SCX24 = RC4WD 030 motor as is just installed for instant torque upgrade. |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
But that man is a beast in fabrication. Hes the one who made the 6x6 with double whammy tranny. So I dont know how he did it. But he did it! "thumbsup" |
Re: RC4WD Gelande II 1/18 motor upgrade found! Quote:
This is The RC4WD Micro Motor, correct? https://store.rc4wd.com/FF-030-Micro...or_p_4957.html . |
Re: RC4WD Gelande II 1/18 Motor upgrade! Yeah that’s the one. Did you keep the Rc4wd pinion on it? Or did you swap the stock pinion to the RC4WD motor? I used the RC4WD motor with the pinion that came on it inside my scx24. I lost some speed. But gained a lot more torque. Sent from your iPhone. |
Re: RC4WD Gelande II 1/18 Motor upgrade! Quote:
|
All times are GMT -6. The time now is 04:36 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com