New Axial scx 24 deadbolt

[BIGW0RM]

Originally Posted by spoo76

Well we know it's 88t so assuming the same style armature the magnet strength is something to consider, I know the RC4WD motor 030 has more turns, however it doesn't have work gears so the 88t may be a decent match. Swapping to a 050 could be better if it had more magnets or the right wind, you can get away with a few less turns on longer can motors

Sent from my LGMP450 using Tapatalk

"liked"

[Xrayray]

Since you guys are on the motor topic, would slapping a couple of extra rare-earth magnets on the outside of the can increase the motor's magnetic torque?

[spoo76]

Originally Posted by Xrayray

Since you guys are on the motor topic, would slapping a couple of extra rare-earth magnets on the outside of the can increase the motor's magnetic torque?

Its been done before on the Losi motors in a 1/24 rally/SCT to pickup some speed. It seemed to work ok.

Sent from my LGMP450 using Tapatalk

[Xrayray]

I talked to my LHS owner, he said he will get these in by beginning of June. I might get one, I have to see it in person tho.

Maybe I’ll put in the 050 Mabuchi motor if it will fit, but the bolt pattern is opposite.

[BashNSlash]

Originally Posted by Xrayray

I talked to my LHS owner, he said he will get these in by beginning of June.

I saw a few people in the Facebook micro group say that they received a notice about their pre-orders - some will have them this week.

[Xrayray]

Originally Posted by BashNSlash

I saw a few people in the Facebook micro group say that they received a notice about their pre-orders - some will have them this week.

sweet, I'm saving up now for it. I have to forget about it for a week before I'm able to get it locally. At least I have something else to run in the meantime.

[BIGW0RM]

Originally Posted by Xrayray

I talked to my LHS owner, he said he will get these in by beginning of June. I might get one, I have to see it in person tho.

Maybe I’ll put in the 050 Mabuchi motor if it will fit, but the bolt pattern is opposite.

My RC4WD 030 that came in my RC4WD blackjack had a motor plate on the top of it. I was able to flip that over to mate my 050 to my blackjack.

Hopefully this one will have that same motor mount/spacer thing my blackjacks 030 came with.




Sent from my iPhone using Tapatalk

[BIGW0RM]

Originally Posted by BashNSlash

I saw a few people in the Facebook micro group say that they received a notice about their pre-orders - some will have them this week.

Yup. Mine shipped! = )


Sent from my iPhone using Tapatalk

[BashNSlash]

Originally Posted by BIGW0RM

Yup. Mine shipped! = )


Sent from my iPhone using Tapatalk

Well, I hope the voyage to Canada doesn't take too long! My son and I can't wait to crawl with these little guys!

[Xrayray]

Originally Posted by BIGW0RM

Yup. Mine shipped! = )


Sent from my iPhone using Tapatalk

Cool let us know about that plate!

[JeepinOR]

Originally Posted by BIGW0RM

Yup. Mine shipped! = )

Yep. Mine, too. Tracking suggests it'll be here Thursday.

[Duramarks]

Mine should be here Friday

Sent from my SM-G955U using Tapatalk

[spoo76]

Wednesday for mine

Sent from my LGMP450 using Tapatalk

[BIGW0RM]

Originally Posted by Xrayray

Cool let us know about that plate!

Check my past posts for pics of that plate.


Sent from my iPhone using Tapatalk

[Xrayray]

Yea I've seen it. The deadbolt has a metal motor plate tho, so maybe that's all it has.

[Jackalo626]

Originally Posted by JeepinCA

Yep. Mine, too. Tracking suggests it'll be here Thursday.

What website did you order from?

Sent from my SM-G955U using Tapatalk

[spoo76]

The motor plate is indeed metal, however the setup is closer to an Ambush/Losi transmission than a Mini Gelande as far as how the motor mounts up.

FYI the Mil Stone brass weight wideners for the Losi micro crawler fit perfectly!

Sent from my LGMP450 using Tapatalk

[MrSquiggles]

AHHHHH!!! Now I have to reconsider everything!!! Do I want to drop a third/4th of what I am working on saving for a 1/10... or do I get this and delay the biggin? I really like my Coyote Pup, except for the nasty torque twist, and love my Basher Rocksta (even though it's slow as a snail) so I know I'd like another... decisions, decisions!

[spoo76]

Originally Posted by MrSquiggles

AHHHHH!!! Now I have to reconsider everything!!! Do I want to drop a third/4th of what I am working on saving for a 1/10... or do I get this and delay the biggin? I really like my Coyote Pup, except for the nasty torque twist, and love my Basher Rocksta (even though it's slow as a snail) so I know I'd like another... decisions, decisions!

So far I would take this over the coyote pup MSA-1E, I have two of them and there is no denying the motor is under sized. It easily gets hot and stalls out.
Also for $10 less this has 3 channel electronics and bearings which Carisma cheaped out on in favor of bushings.

Sent from my LGMP450 using Tapatalk

[MrSquiggles]

Originally Posted by spoo76

So far I would take this over the coyote pup MSA-1E, I have two of them and there is no denying the motor is under sized. It easily gets hot and stalls out.
Also for $10 less this has 3 channel electronics and bearings which Carisma cheaped out on in favor of bushings.

Sent from my LGMP450 using Tapatalk

uggg... you're not making my foray into 1/10 crawlers any easier!!! I agree the motor is undersized or it's geared too high. I thought the "3 speed" feature might be more than just a throttle damper, but alas no.

If this had only come out a month earlier.