Axial scx24 mathcanbefun build

[resetpunk]

Originally Posted by mathcanbefun

Thanks boss!
The claws are amazing.. They have alot more grip than the stock tires but they are smaller. You can find them at rc4wd or Amazon. The wheels are gearhead m-12's from RPP's website. The claws fit them with no glue if you use foams. If your not using foam it will depend on the quality of the tires you get (one of my tire was significantly less stiff than the other 3 tires and wouldnt stay on the rim, luckily they are cheap).
The rc4wd motor is good so far. I'm using the brass pinion that comes with it. It's definitely a little slower than stock. But that comes with a little more control and torque, but less wheel speed. Using the stock pinion might bump the speed back up.
I am also a fan of the bumper! Found that on thingiverse, sanded the heck out of it then painted it.

darn the claws are shorter? was hoping atleast the same height atleast! alright ill check them out thanks! what about the spacer weights? i dont care much for the wheel speed as the torque would be better imo anyways so thats perfect!

[mathcanbefun]

Originally Posted by resetpunk

darn the claws are shorter? was hoping atleast the same height atleast! alright ill check them out thanks! what about the spacer weights? i dont care much for the wheel speed as the torque would be better imo anyways so thats perfect!

Noticeably shorter yes. They look more scale in my opinion but I liked the look of the stock tires too. Those are the mil spec spacer weights from ebay, originally made for Losi micros. They work great, but I had to paint them because the brass stuck out too much.

Sent from my Pixel 3 XL using Tapatalk

[resetpunk]

Originally Posted by mathcanbefun

Noticeably shorter yes. They look more scale in my opinion but I liked the look of the stock tires too. Those are the mil spec spacer weights from ebay, originally made for Losi micros. They work great, but I had to paint them because the brass stuck out too much.

Sent from my Pixel 3 XL using Tapatalk

Ahh ok gotcha, did some looking and looks like there about 1/4” shorter.
I got crafty and did the pellet trick with my wheels for now and it worked out great! What’s the chance you could make me one of them bumpers and I could buy from you?