RCCrawler Forums - Dim Stock SCX24 LEDs

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Micro Scale Rigs (http://www.rccrawler.com/forum/micro-scale-rigs/)

- - Dim Stock SCX24 LEDs (http://www.rccrawler.com/forum/micro-scale-rigs/611194-dim-stock-scx24-leds.html)

Dim Stock SCX24 LEDs

This is only for people with LED OBSESSION COMPULSION DISORDER, with their RC stuff and their LEDs go dim. On the stock Axial ESC/RECEIVER next to the STR channel that the servo plugs into is slot CH2, there is a big difference in what pins you plug in the LEDs. Stock LEDs only has a 2 pin plug. If you plug negative side plug on the top pin you get DIM FRONT LEDs. If you plug Negative side plug in the Bottom and Positive side plug In the Middle Pin, YOU GET BRIGHT LEDS. It’s also the same in other slots ( AUX, LED, LED,)

Re: Dim Stock SCX24 LEDs

Quote:

Originally Posted by Budman (Post 5958016)

Sounds like the dim plugging way is reverse voltage to the LEDs, they don't like reverse voltage, but if it's enough voltage you still get light. Ensure they are plugged in proper orientation. :)

Re: Dim Stock SCX24 LEDs

You can also get working brake lights if you plug the rear lights into the proper slot in the proper orientation

Sent from my Pixel 3 XL using Tapatalk