Another trx4m in the works. Specs so far. Fast Eddy bearing kit. Low range gear set. Extreme pro 180 motor w/ neo mag’s Treal wheels wrapped in Lgrp grippers Cheap Amazon Scx24 extended brass hex’s and Kinetic/milstone 2.5 sumo barrel nuts. Painted knuckles and diff covers. Injora D rings. https://uploads.tapatalk-cdn.com/202...2fda76f8dc.jpg https://uploads.tapatalk-cdn.com/202...0bbb232533.jpg https://uploads.tapatalk-cdn.com/202...a3631ee7d3.jpg https://uploads.tapatalk-cdn.com/202...5a1cdeaec7.jpg Sent from my iPhone using Tapatalk |
Re: Another trx4m in the works. Heck yes. Love the wheel/tire combo. How’s that motor working out? |
Re: Another trx4m in the works. Sweet Bronco! Nice upgrades! I'm curious to know too how the motor is working out! |
Re: Another trx4m in the works. Nice work. I'm wondering on the motor too. That's the last motor I would have expected , didn't even think that company would still be around. Long story but basically I brought them into the US back when they were first getting going. Made good stuff. Sent from my SM-S906U using Tapatalk |
Re: Another trx4m in the works. Thanks fellas! The xtreme motor is a beast probably the best 180 size brushed motor ever made imo. The low end torque is there and the wheel speed is nuts. With the low range gear set it’s faster than the stock trail gears and motor but with twice the low end control. I have had several different micro builds with them going back to the old losi micro days. Problem is the esc shuts down every once in a while when I go full throttle for about two seconds then comes back on line. I’m going to be swapping esc’s today and the problem should go away. Another downside is they have been discontinued for quite some time now but I still have a few stashed away from back in the day. Sent from my iPhone using Tapatalk |
Re: Another trx4m in the works. Another sweet Bronco with nice mods, how's it going lately? |
Re: Another trx4m in the works. A good looking Bronco for sure. Those tires look killer and the painted diff covers and knuckles are a real nice touch! "thumbsup" |
Re: Another trx4m in the works. Nice combo for sure. Trick underneath and deluxe stock looking exterior. You are answering a lot of our curiosities on the crawl gears and bumped up motor. Low end grunt but still attaining wheel speed is good. The stock motor/stock gears stall out easily with 58+ mm tires. |
Re: Another trx4m in the works. Thanks fellas I had forgotten about this post. A lot has changed in the last couple of months. This bronco is getting converted over to a k10. So I had to build up another bronco this time keeping the stock electronics with the exception of the 66t Holmes motor. Also picked up a defender that is getting a khan wide body kit from club5 stock electronics with you guessed it another 66t Holmes. Number 4 is a meus ripper chassis with all the goods. Injora axles, shocks and brass goods. furitek lizard pro and micro komodo. It’s a blast! https://uploads.tapatalk-cdn.com/202...3a07dedd10.jpg https://uploads.tapatalk-cdn.com/202...ffa1943d48.jpg https://uploads.tapatalk-cdn.com/202...5d8a10a570.jpg https://uploads.tapatalk-cdn.com/202...047ce1024f.jpg Sent from my iPhone using Tapatalk |
Re: Another trx4m in the works. Yes, the transmission crawl gears are a must but then it get's a lack of wheelspeed therefore I've also bought the HH 66T motor. Wows, that Toyota FJ pickup in the background, very nice! That 3d printed Bronco bumper should be rounded to follow the front contour, wish somebody made/printed a nice looking high clearance one with good print quality. :) |
Re: Another trx4m in the works. Picked up the k10 a few days ago and decided I need another mud truck for the upcoming rainy season. Specs: Extreme pro 180 motor stock trans gears Hobbywing 1080 68mm djcrawler meats on some hardpark rims Rampcrab +5 widening kit (nice kit especially for the price) De chromed and removed all the decals re sprayed gloss white https://uploads.tapatalk-cdn.com/202...fe29ac36c2.jpg Sent from my iPhone using Tapatalk |
Re: Another trx4m in the works. Nice builds my brother, glad to see that you're still at it. I'm waiting on parts for a few mini builds as well. I love what you did with the K10, that stance is mean. |
Re: Another trx4m in the works. Quote:
My man, how ya been? It’s hard not to still be at it with all the great choices available now. I never imagined the micro game would blow up like this. I still miss the old days when builds were more one offs with hand made parts instead of off the shelf. Finished up another 4m Injora universal lcg chassis Injora diamond axles OGRC 60mm shocks Injora ir40 body and cage Extreme 180 motor Injora 1.3’s Injora mb100 esc Stock trans gears Injora straight links front bumped out 9mm Nsdrc rs100 https://uploads.tapatalk-cdn.com/202...266f5069c5.jpg https://uploads.tapatalk-cdn.com/202...ea99e97584.jpg https://uploads.tapatalk-cdn.com/202...b077a398a0.jpg Poser shots before a shake down run https://uploads.tapatalk-cdn.com/202...15ab6697af.jpg https://uploads.tapatalk-cdn.com/202...8ad9e49d97.jpg https://uploads.tapatalk-cdn.com/202...d077b87135.jpg https://uploads.tapatalk-cdn.com/202...2a003e70e2.jpg Sent from my iPhone using Tapatalk |
Re: Another trx4m in the works. Rigs looking good as always Chevy. I am recently getting back into the micro/mini by picking up a TRX4M. Alot has changed since I first got into it. I remember alot of your old builds. Jeepspeed being one of my favorite ones. Hell I still got a set of Miclaws and one of your DDP predator big blocks you sold me for the old micro crawler/trail trekkers. Funny enough I put a new pinion on it and it lives again in my friends trx4m. |
All times are GMT -6. The time now is 12:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com