|
| LinkBack | Thread Tools | Display Modes |
02-24-2008, 06:34 PM | #1 |
Newbie Join Date: Mar 2007 Location: Twin Cities
Posts: 13
| Thinking about building a 2.2 rig - advice?
Hi all, Thinking about building a 2.2 rig. From everything I've read it seems like the axial is the best bet? Yes/no? I found one for $209 - anyplace cheaper? Keep in mind I don't know much about radios: if I do get one I would probably want to get a new 3/4 ch pistol grip radio that I could use for both rigs. (Supposedly I can't easily get a additional receiver for current radio and it would have to be tuned if I did...) Any recomendations? Thanks everyone, David |
Sponsored Links | |
02-24-2008, 07:40 PM | #2 |
Rock Stacker Join Date: Apr 2006 Location: Cannon Falls
Posts: 74
| maddjack I would go with the axial scorpion, or should I say have gone with the axial. My newest rig is an axial sccaler. As for radio That depends what you want to spend, I myself went with a TQ3 runs both of my rigs and there is no interferince from other radios. |
02-24-2008, 08:22 PM | #3 |
RCC Addict Join Date: Apr 2006 Location: Minnehopeless
Posts: 1,129
| The Axial is a good rig for 2.2. Stout axles and trans. I've heard people having problems with the screws stripping out on the beadlock rims, caps popping off the shocks, and the upper link mount on the axles popping out, but all of those have easy fixes. There are a lot of upgrades coming out for the AX10 right now too. What radio are you using currently? I don't know why you wouldn't be able to get another receiver for it. But if you do have to get a new radio, I've had great luck with my DX3. I'll probably never go with anything other than spektrum again. |
02-25-2008, 12:01 AM | #4 | |
Rock Crawler Join Date: Feb 2007 Location: weather sucks ,mn
Posts: 680
| Quote:
i think you have a spek don't you jack if so that's not a tq3 | |
02-25-2008, 05:49 PM | #5 | |
Newbie Join Date: Mar 2007 Location: Twin Cities
Posts: 13
| Quote:
Thanks, | |
02-25-2008, 05:55 PM | #6 |
Web Wheeling Join Date: Jan 2005 Location: Twin Cities
Posts: 3,004
|
I think the hitec agressor radios are 3 channel that can run rear steer... I don't really know what 3 channel radios have a 3P switch though (three posiution)
|
03-01-2008, 05:39 PM | #7 |
Rock Stacker Join Date: Apr 2006 Location: Cannon Falls
Posts: 74
| maddjack |
03-26-2008, 06:46 PM | #8 |
Rock Stacker Join Date: Apr 2006 Location: Cannon Falls
Posts: 74
| maddjack When it comes to three position switch radios the spectrun has one |
04-05-2008, 11:40 AM | #9 |
Newbie Join Date: Mar 2007 Location: Twin Cities
Posts: 13
|
Another dumb question: Can these 3 ch pistol radios be used with a rig with front/rear steering? In another words, is there a switch or something that can be flipped to switch the steering between the two channels used for steering? Thanks, |
| |