|
| LinkBack | Thread Tools | Display Modes |
10-09-2019, 10:55 AM | #1 |
Let me 3D Print that... Join Date: Jun 2007 Location: Concord
Posts: 315
| 3 Inch Roll Bars for RC4WD Blazer Pickup Conversions
I have designed a couple of old school 3 inch roll bars that work with RC4WD Blazer pickup conversions. There is a single tube version and a double tube version. Both feature two mounting tabs on the top that can be used for mounting lights with M3 screws. Single tube version: https://www.shapeways.com/product/YK...ionId=65443211 Double tube version: https://www.shapeways.com/product/CB...ionId=65455422 Here are some pics of the single tube version on my personal build: Installation is simple. Put the bar in the location you want to install it and find the center of the mounting flange using a couple of marks. I would recommend starting with the front two legs first, then once they are mounted with screws, locate the rear legs and mark them. Drill the center mark with a 1/8 inch (3.2mm) bit. Finally, attach the roll bar with (4) M3X8 screws from underneath. They will thread into the holes, but be careful not to over-tighten them. |
Sponsored Links | |
11-26-2019, 12:26 PM | #2 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: 3 Inch Roll Bars for RC4WD Blazer Pickup Conversions
Wow, very nice, you should do these for TF2 also! |
3 Inch Roll Bars for RC4WD Blazer Pickup Conversions - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pickup Specific Tailgates for RC4WD Blazer Beds | RexRacer19 | MOD19RC | 0 | 10-09-2019 10:53 AM |
New Bumpers for RC4WD Blazer Pickup Conversions | RexRacer19 | MOD19RC | 0 | 10-09-2019 10:50 AM |
RC4WD Blazer Cab Backs for Pickuo Conversions. | RexRacer19 | MOD19RC | 0 | 10-09-2019 10:46 AM |
RC4WD Blazer Bed Extensions for Pickup Conversions | RexRacer19 | MOD19RC | 0 | 10-09-2019 10:44 AM |
| |