|
| LinkBack | Thread Tools | Display Modes |
12-05-2019, 11:00 AM | #1 |
Let me 3D Print that... Join Date: Jun 2007 Location: Concord
Posts: 315
| SCX24 Alternate Roll Cage Design
Change the looks and performance of the Axial SCX24 with this roll cage. It has a more compact style overall and and is 6 grams lighter than the factory roll cage (3g vs 9g). It mounts using the factory screws and does not require any modification to the body. It can be purchased in black, or white if you would like to paint it yourself and save a couple of dollars. **IMPORTANT** You should use either a 1.1mm or a #57 (.043") drill bit to clean out the screw holes. There is always a small amount of unsintered powder left in deep holes despite the cleaning process. Not cleaning the holes out prior to mounting will likely cause the screws to not go all the way in and possibly stripping out the holes. Product Link: https://www.shapeways.com/product/8H...onId=108774878 Thanks for looking! Please post any questions below. |
Sponsored Links | |
SCX24 Alternate Roll Cage Design - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wraith cage from scratch - tube frame top vs roll cage top? | phillyb | Axial Wraith | 3 | 12-20-2013 06:50 PM |
Roll Cage/Exo Cage? | ZackMicF | Paint and Body | 6 | 07-04-2012 06:19 AM |
roll cage design opinions | BigSki | General Scale Talk | 0 | 06-28-2012 07:28 PM |
roll cage | itamardagan | Kyosho Crawlers | 2 | 12-09-2004 11:31 PM |
Thread Tools | |
Display Modes | |
| |