SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

Mod19RC is now offering a new option for mounting the RC4WD Mojave II 2-Door to the Axial Racing SCX10ii chassis. These mounts are printed through Shapeways using SLS Nylon for strength, durability, and quality. They attach directly to the SCX10ii chassis using the factory screws.

These mounts are designed with scale builders in mind and feature a unique body mount tab that can be positioned four different ways to help get the exact look and tire fitment to suit your build.

The left and right sides must be purchased separately (to keep print costs down) and each includes a body mount tab. Additional body tab sets can be purchased separately if mounting multiple bodies to the same chassis.

Pricing for the set (both sides) will be $38.98. You will also need to provide the (4) stock M3 x 8 screws from the Mojave body along with (4) M3 x 10mm Flat Head Socket Cap Screws to attach the body tabs to the mounts. Hit the link below to purchase. Thanks for looking!

https://www.shapeways.com/shops/mod19-rc


https://farm2.staticflickr.com/1972/...6ea0ed46_b.jpg

https://farm2.staticflickr.com/1935/...60af2d1c_b.jpg

https://farm2.staticflickr.com/1943/...0bcba20e_b.jpg

https://farm2.staticflickr.com/1979/...223bc608_b.jpg

https://farm2.staticflickr.com/1852/...9355bf78_b.jpg

https://farm2.staticflickr.com/1953/...094079fa_b.jpg

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

Nice![emoji106] I've been looking for an easy way to mount the Mojave body. I'm going to have to pick up a set!

Sent from my SM-G930V using Tapatalk

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

Thank you. Lots of folks have been using them with success. Don't forget to check out the front inner fenders also. They work perfectly with the mounts. "thumbsup"

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

Will this mounts work with scx10 II 2 speed tranny?

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

If you are counting on mounting the shift servo on the skid, then likely not. Just not enough room there.

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

This is an old post but does anyone know if this setup will fit on the enduro (trailwalker) chassis??


Sent from my iPhone using Tapatalk

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

It won't unfortunately. Will work with the SSD Trail King though.

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

do you have a picture with the electronics mounted?
what about at the different mount positions?

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

For my personal build, I made a custom battery tray that would fit a 3S 3500 battery. The esc and waterproof rx box were mounted to the other side. I don't have any comparison pics of the body mount positions. The are subtle and meant for fine tuning based on your preferences.

https://live.staticflickr.com/7864/4...5f364f7c_b.jpg

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

I install a Power HD TR4 micro servo and it clears the body mounts w/o issues.

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

What rock sliders will work with these? The fit is spot on with the 11.4" wheelbase. Love it!https://uploads.tapatalk-cdn.com/202...383c26ba8c.jpg

Sent from my SM-S911U using Tapatalk

Re: SCX10ii Body Mounts for the RC4WD Mojave II 2-Door
 

Good stuff!