|
| LinkBack | Thread Tools | Display Modes |
01-04-2020, 02:44 PM | #1 |
Let me 3D Print that... Join Date: Jun 2007 Location: Concord
Posts: 315
| SCX24 ECX Barrage Motor Mount
Now available for the Axial Racing SCX24 is a 3D printed brass motor mount that lets you install the 1/24 ECX Barrage motor into the SCX24. As folks modify and add weight to the SCX24 the stock motor starts to struggle and many report early failures. A popular upgrade motor is the ECX Barrage motor. It is a FF-050 motor which is a similar format but longer. This motor has good low end and more torque than the stock motor, but has a different hole pattern than the stock 030 motor. Some folks have drilled their mounts to accept the barrage motor with mixed results. The Mod19RC ECX Barrage motor mount takes the guesswork out of the swap. It is a direct replacement for the factory motor mount and allows you to use either the stock motor size or the Barrage motor size. The stock battery tray needs to be modified for the the larger motor to fit. The Mod19RC Low CG battery tray does not work in it's current design, but the Super Low CG battery tray will work by removing one leg of the mount and cutting it flush with the side of the tray. (see pics) This motor will fit in the Micro Shark conversion. If the Micro Shark was purchased before 12/23/19 then you will have to clearance the interior crossmember to get it to fit correctly. Micro Sharks purchased after 12/23/19 have this clearance already added. The ECX Barrage Motor mount can be found in the SCX24 section of the Mod19RC Shapeways store here: https://www.shapeways.com/shops/mod1...CX24+Parts&s=0 |
Sponsored Links | |
01-29-2020, 03:07 PM | #2 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: SCX24 ECX Barrage Motor Mount
Wow, very nicely done! |
01-30-2020, 10:25 AM | #3 |
Let me 3D Print that... Join Date: Jun 2007 Location: Concord
Posts: 315
| Re: SCX24 ECX Barrage Motor Mount
Thanks!
|
SCX24 ECX Barrage Motor Mount - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ECX Barrage Double Motor Tranny | Shape_Shifter | Micro Scale Rigs | 34 | 08-01-2019 09:38 PM |
ECX Barrage - motor getting very hot, traxxas 380 upgrade? | 2k2wranglerx | General Scale Talk | 22 | 11-21-2018 06:37 AM |
Ecx barrage motor upgrade? | Yotaboy89 | Micro Scale Rigs | 10 | 09-03-2018 02:30 PM |
Ecx barrage motor upgrade? | Darrell | Newbie General | 5 | 06-08-2017 01:35 PM |
| |