SCX24 Improved Steering Linkage

[RexRacer19]

This is a steering linkage set for the Axial SCX24. The linkage set will eliminate most of the play found in the stock linkage. It is a direct replacement for the factory parts with no modifications needed. Included are (2) complete sets of linkages. Share with a friend or have a spare set. Pay attention to the correct orientation of the upper link. The angled end attaches to the servo horn.

**IMPORTANT** You should use either a 1.1mm or a #57 (.043") drill bit to clean out the screw hole for the ball end. There is always a small amount of unsintered powder left in deep holes despite the cleaning process.

Product link: https://www.shapeways.com/product/PP...onId=108773656











Here is a short video comparing it to stock and demonstrating it in action.

https://www.youtube.com/watch?v=e7Bi45gbh9w


Thanks for looking! Please post any questions below.

[Jackalo626]

Gonna order a set myself. Forgot about wanting this.

Sent from my SM-G955U using Tapatalk

[B-MOW71]

Ordered mine last weekend.

Looking forward to getting these installed on my tiny SCX24! I was shocked at how much "slop" there was in the stock steering linkages!

[RexRacer19]

Originally Posted by Jackalo626

Gonna order a set myself. Forgot about wanting this.

Originally Posted by B-MOW71

Ordered mine last weekend.

Looking forward to getting these installed on my tiny SCX24! I was shocked at how much "slop" there was in the stock steering linkages!

Awesome. Enjoy, guys. It is really surprising how sloppy the stock parts are.