|
| LinkBack | Thread Tools | Display Modes |
03-28-2014, 05:57 PM | #1 |
Newbie Join Date: Mar 2014 Location: Bradford (uk)
Posts: 11
| 6x6 scx10 build (help needed)
Never done anything like this before im going down the but another scx10 dingo kit and robbing it of parts Any hints or tips ? Cheers guys im sure im the millionth person to ask |
Sponsored Links | |
03-28-2014, 06:16 PM | #2 |
Rock Crawler Join Date: Jan 2007 Location: Lehigh Valley
Posts: 956
| Re: 6x6 scx10 build (help needed)
There are plenty of SCX based builds here, look through them for tons of great tips. If you get two SCX kits you can sell or trade off the extra's you don't need for stuff you do need.
|
03-29-2014, 12:17 PM | #3 |
Newbie Join Date: Mar 2014 Location: Bradford (uk)
Posts: 11
|
Got my kit |
03-29-2014, 01:42 PM | #4 |
Newbie Join Date: Mar 2014 Location: Bradford (uk)
Posts: 11
|
Do you cut this lip off ? |
03-29-2014, 06:55 PM | #5 |
Newbie Join Date: Dec 2012 Location: Canton
Posts: 31
|
That's the one yes
|
03-30-2014, 01:57 AM | #6 |
Newbie Join Date: Mar 2014 Location: Bradford (uk)
Posts: 11
|
Cheers the gears feel a bit tight is this normal? Also can I use the standard links from the kit ? Anyone got a picture of there link set up Cheers |
03-30-2014, 01:19 PM | #7 |
Quarry Creeper Join Date: Jan 2009 Location: East Mids, UK
Posts: 362
| Re: 6x6 scx10 build (help needed)
Hi ts4n, If you go onto Axial's site, Brandon has got a list of all the links he used for his 2.2 SCX 6x6. Google 'Brandon 6x6', it should come up. I'll try and find it again, Here you go: http://www.axialracing.com/blog_posts/5692 Last edited by eemmaaxxxx; 03-30-2014 at 01:25 PM. |
03-31-2014, 09:56 AM | #8 |
Rock Stacker Join Date: Mar 2012 Location: North Highlands, CA
Posts: 80
| Re: 6x6 scx10 build (help needed)
You can use all thread and ally tubing and make your own links. Can get it cheap at any hardware shop. Here is a youtube video I used to make mine. They work just fine and have used them on two cars now. https://www.youtube.com/watch?v=gVV8DgZmQz8 Last edited by cg78; 03-31-2014 at 10:00 AM. |
04-02-2014, 12:06 PM | #9 |
Quarry Creeper Join Date: May 2012 Location: My own personal Heaven
Posts: 212
| Re: 6x6 scx10 build (help needed)
If you aren't familiar with the link setup for a 6x6 that Axial build is a great one to start with. I used that as an initial guide for my 6x6. The third axle doesn't get much independent articulation with that setup however...
|
04-02-2014, 04:11 PM | #10 |
Rock Stacker Join Date: Apr 2009 Location: topeka
Posts: 60
| Re: 6x6 scx10 build (help needed)
I just started my 6x6 build as well using the rc4wd chassis and scx10 axles. My middle axles was hard to turn at first also then after about 5mins of spinning it it got better, Good luck on the build
|
6x6 scx10 build (help needed) - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tonka SCX10 6x6 build | noobiescaler35 | Axial SCX-10 | 12 | 01-20-2016 02:26 PM |
New build - SCX10 6x6 Unimog Flatbed | patoff | Multi Axle Rigs | 45 | 11-28-2013 02:36 PM |
Custom SCX10 6x6 dually build | LGFAB | 2.2 Scale Rigs | 26 | 07-05-2013 12:41 AM |
Custome 6x6 help needed | Speedmutant | Newbie General | 0 | 04-03-2012 12:20 AM |
Broke MoFo scx10 6x6 unimog build | igotit | Axial SCX-10 | 11 | 04-03-2009 08:27 PM |
Thread Tools | |
Display Modes | |
| |