RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Multi Axle Rigs (http://www.rccrawler.com/forum/multi-axle-rigs/)
-   -   Snapon' s 6x6 build (http://www.rccrawler.com/forum/multi-axle-rigs/564437-snapon-s-6x6-build.html)

allanon1965 09-24-2017 10:48 AM

Re: Snapon' s 6x6 build
 
what shocks are you running, they dont look like stock scx10 shocks but I could be wrong...my axial icons are leaking profusely now and I want to get something that wont leak..

snapon boy 09-24-2017 10:54 AM

Re: Snapon' s 6x6 build
 
Quote:

Originally Posted by allanon1965 (Post 5751225)
what shocks are you running, they dont look like stock scx10 shocks but I could be wrong...my axial icons are leaking profusely now and I want to get something that wont leak..

I use Scx10 shocks with Traxxas orings and hpi bladder in the top with green slime to build with. I put krazed builds pistons in them. The others I use and they leak less than any other shock I know of it the koyosho velvets

149 r/c worx/scalerfab/team brood.

allanon1965 09-24-2017 11:13 AM

Re: Snapon' s 6x6 build
 
thanks!

snapon boy 09-24-2017 04:41 PM

Re: Snapon' s 6x6 build
 
I'll post a part number or picture when I get home

149 r/c worx/scalerfab/team brood.

snapon boy 01-13-2018 09:32 PM

Re: Snapon' s 6x6 build
 
Well I tore down the 6x6 and rebuilt it better than before. New bed, new body and wheels also. I replaced the long dead foams with soft comp cut med comp cut and firm major improvement it driving. I put in a new 7954sh servo added beef tubes in the 2 rear axles along with deadloc racing lockers and under drive ring gears it helps the steering some. Mip shafts as well, hopping to participate in a few pulloffs thus season. https://uploads.tapatalk-cdn.com/201...8c9ff87ca2.jpg

149 r/c worx/scalerfab/team brood.

CODYBOY 01-13-2018 11:17 PM

Re: Snapon' s 6x6 build
 
Looking good Fish!!! I like the color combo you picked. "thumbsup"
Ernie

allanon1965 01-13-2018 11:22 PM

Re: Snapon' s 6x6 build
 
looks great bud!!!!!

snapon boy 01-14-2018 10:13 AM

Re: Snapon' s 6x6 build
 
I'll try to post up a few videos on utube soon.

149 r/c worx/scalerfab/team brood.

allanon1965 06-16-2018 08:10 PM

Re: Snapon' s 6x6 build
 
any updates to this yet? Killer body!

snapon boy 06-16-2018 08:14 PM

Re: Snapon' s 6x6 build
 
Just finished putting 6 new proline hyraxx and 6 new 2 stage ci foams. Soft front /medium middle /firm rear. https://uploads.tapatalk-cdn.com/201...0dee924220.jpg

149 r/c worx/scalerfab/team brood.

allanon1965 06-16-2018 10:00 PM

Re: Snapon' s 6x6 build
 
This new cab body makes the rig! I cant think of a better choice unless its a 34 ford lol! It looks like old military transportation"thumbsup"

snapon boy 06-16-2018 10:06 PM

Re: Snapon' s 6x6 build
 
I made inner finders but they just don't seem to be installing themselves. Lol.

149 r/c worx/scalerfab/team brood.

allanon1965 06-16-2018 10:10 PM

Re: Snapon' s 6x6 build
 
I know what you mean, I have the same problem sometimes... I mean, I leave parts on the bench, tools and hardware, and in the morning they still are not installed! WTH?

looking forward to some new video!

snapon boy 06-16-2018 10:15 PM

Re: Snapon' s 6x6 build
 
I've got one up on utube of it climbing a near vertical rock bolder. I think we measured it at 67 degrees or something like that.

149 r/c worx/scalerfab/team brood.

snapon boy 06-16-2018 10:17 PM

Re: Snapon' s 6x6 build
 
https://youtu.be/76Co0Y6rmXk

149 r/c worx/scalerfab/team brood.

wblteen 06-16-2018 10:19 PM

Re: Snapon' s 6x6 build
 
Wow

Sent from my SM-N950U using Tapatalk

allanon1965 06-16-2018 10:21 PM

Re: Snapon' s 6x6 build
 
Quote:

Originally Posted by wblteen (Post 5842808)
Wow

Sent from my SM-N950U using Tapatalk




Indeed!

snapon boy 04-05-2019 03:25 AM

Re: Snapon' s 6x6 build
 
Well, I made a few more updates to the rig. I put vp underdrive gears in both rear Axles and stock vp gears in the front. I changed the esc to a castle mmp and the servo to a promodeler 630oz. I installed corrupt carbon works tec flex and cleaned up the wiring and a new high clearance skid color matched. I made a few trades and got 6 new vp kmc orange and black wheels as well. It's been a long time since I have posted but I think it's been about a 3 year build. I'm going to use a new steel 149 r/c worx frame and have it powder coated to match the body color soon.

Sent from my SM-N960U using Tapatalk

snapon boy 04-05-2019 03:40 AM

Re: Snapon' s 6x6 build
 
Here is a few pictures of the updates. https://uploads.tapatalk-cdn.com/201...2734e3c7eb.jpghttps://uploads.tapatalk-cdn.com/201...6a80d079bf.jpghttps://uploads.tapatalk-cdn.com/201...4eb4308309.jpg

Sent from my SM-N960U using Tapatalk

allanon1965 05-16-2019 08:52 PM

Re: Snapon' s 6x6 build
 
Quote:

Originally Posted by snapon boy (Post 5924990)




very nice work man!!


All times are GMT -6. The time now is 05:27 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com