|
Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig I've had the parts to build a 6x6 for over a year and just couldn't find the right inspiration. After seeing the Super Six I knew it was the one. Plus it will be perfect for towing my #Brodozer to the trail ;) http://uploads.tapatalk-cdn.com/2016...2c7c202d08.jpg The plan is for a heavy powerful go pretty much anywhere rig. Sadly I won't be doing it in full independent suspension like the 1:1 but it will have 6ws. Parts list: Body (ies) - Proline 2008 f250 crew cab x2 and f250 honcho Driveline - xr mod and standard scx10 axles with beef tubes and hd ud gears. Traxxas maxx driveshafts. Electronics - Hobbywing 1:8 sensored esc with turnigy 2650 kv 1/8 sensored motor. 3s or 4s lipo. Trans - Supershafty bomb proof with 6mm outputs Wheels/tires - I want to run voodoo U4 since they look like the Goodyear military tires but I have four flat iron xl laying around so I'll prob get 2 more of those. Suspension - Custom 4 link on all axles, shocks/springs tbd Chassis/bed - custom made by me To get started the body has to at least be roughed out. I'm using a new f250 crew and 1 used one. Then I have the rear cap from the f250 honcho I cut up to make the Brodozer. Lots of cutting and resizing of panels. http://uploads.tapatalk-cdn.com/2016...fcac92f196.jpg http://uploads.tapatalk-cdn.com/2016...6f7908ab4c.jpg http://uploads.tapatalk-cdn.com/2016...262de6146a.jpg http://uploads.tapatalk-cdn.com/2016...d7d89230b9.jpg http://uploads.tapatalk-cdn.com/2016...3d2b920566.jpg http://uploads.tapatalk-cdn.com/2016...92ccfcbee5.jpg It's at a point where I can glue it together now. Then it's time to lay out the chassis and the axles to see how this thing will come together. P.S. I get asked why use lexan instead of the tamiya f250. Biggest reason is size. I want this to be proportional to the Brodozer. Secondly, I am going to drive this thing...hard. The 1:8 electronics are in there to be able to thrash the living he!! Out of this thing. The lexan body is more resilient than styrene or abs. Plus the joining of these bodies is generally less work than the styrene. Albeit not always as pretty. Sent from my iPhone using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig This is going to be a awesome build. Have you seen the new 6x6 chassis from Cbercfab? http://uploads.tapatalk-cdn.com/2016...70a98c73a9.jpg |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig More!!!!!!!! |
Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Quote:
Planning on 3/8" square tubing with some custom skid plates and link mounts. I finally made some progress on the body. http://uploads.tapatalk-cdn.com/2016...56e5c08444.jpg Spent the night figuring out tires and axles. I was debating between wraith axles, xr mod scx axles, or stock scx. After much deliberation I'm using a narrowed wraith axle I made in the past with an scx pass through and scx rear axle. The narrowed wraith up front allows me to flip the gears to get all the wheels turning the right direction. Made a decision on tires too. Going with Voodoo U4 tires. They look as close to the military good years. Plus they'll perform well. Using CI DW foams. Wheels are still in the works. We'll see what I come up with. Axial ripsaws and falkens with some axial trail readys just for mockup. http://uploads.tapatalk-cdn.com/2016...17ad853661.jpg Chassis is looking to be around 28" long. The wheelbase to the first axle around 16" and the rear axle around 22.5". She's going to be a beast!! Sent from my iPad using Tapatalk |
Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig The first 2/3 of my tires came today. Wow the voodoo u4 is a nice tire and I think it's as close a match to the military good years and the smooth sidewalls look perfect with the real tires. I'm using the axial trail readys as they're all black so they'll work out well. http://uploads.tapatalk-cdn.com/2016...f2d31d6557.jpg http://uploads.tapatalk-cdn.com/2016...7d5fc50cc9.jpg http://uploads.tapatalk-cdn.com/2016...7364c30b90.jpg Started waterproofing the electronics. The esc has two layers of pcb so we'll see how good of a job I can do. http://uploads.tapatalk-cdn.com/2016...9685c348b2.jpg Then I started laying out the skid and making templates for the skid plate mount and the rear link mounts. http://uploads.tapatalk-cdn.com/2016...95509efe8d.jpg http://uploads.tapatalk-cdn.com/2016...93dc5720bb.jpg http://uploads.tapatalk-cdn.com/2016...1d452d1865.jpg http://uploads.tapatalk-cdn.com/2016...ad022d6f29.jpg Sent from my iPad using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig I got some time to really start on the chassis. To this point it was just the frame rails cut and brazed with some cross bracing. I cut and bent the skid plate drop mounts out of 16ga steel. Using an AX10 skid plate out of delrin. http://uploads.tapatalk-cdn.com/2016...6221692102.jpg Then I cut the rear link mounts out of the same steel http://uploads.tapatalk-cdn.com/2016...ad08ce8a7f.jpg Got the rear two axles mounted. http://uploads.tapatalk-cdn.com/2016...74b076ace0.jpg http://uploads.tapatalk-cdn.com/2016...3ba123a87d.jpg Then I got the lower mounts for the front axle done. http://uploads.tapatalk-cdn.com/2016...1028b800f3.jpg Since it's a narrowed wraith axle. I either need to go cms or make a custom 4link mount with a servo mount. Here's a couple with the body thrown on. http://uploads.tapatalk-cdn.com/2016...f701d8194e.jpg http://uploads.tapatalk-cdn.com/2016...01aeb6a084.jpg Sent from my iPad using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Parts come in from rpp yesterday!! http://uploads.tapatalk-cdn.com/2016...4efa85b79e.jpg Finally got some time on the internal cage. It's going to be simple. Really just to hold the body square. The longest rock rails I've ever made!! http://uploads.tapatalk-cdn.com/2016...5e9e28f72c.jpg The "D" pillar to start lol http://uploads.tapatalk-cdn.com/2016...25a37d0f7c.jpg Got through almost all of it last night. It's 3/16" solid rod so I don't plan on adding s lot of support structure. http://uploads.tapatalk-cdn.com/2016...88008fce02.jpg http://uploads.tapatalk-cdn.com/2016...d9c51c8a5d.jpg And the body is in the paint shop. Going to try tamiya white putty as a filler for some of the gaps. Thanks to superdrty for the idea http://uploads.tapatalk-cdn.com/2016...3f070b0cd6.jpg Sent from my iPhone using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Several thin coats of tamiya putty on the joints I want to clean up and she's ready for paint again. I know the putty if not for Lexan that will be abused but I just wanted to try it. http://uploads.tapatalk-cdn.com/2016...363990851e.jpg Based on some prodding from nerby I added jato rod ends to the rear axles to get more overall length. http://uploads.tapatalk-cdn.com/2016...c64d33776f.jpg http://uploads.tapatalk-cdn.com/2016...4362cf0ffc.jpg http://uploads.tapatalk-cdn.com/2016...fd89783b46.jpg I stuffed in the power plant to the trans. Let's just say that it took some grinding on the motor plate ;). Should be a beast...I'm not sure how it'll do crawling. It is sensored but it's geared 15/56 now just to make it work. But it's a 2350kv motor. So we'll see. http://uploads.tapatalk-cdn.com/2016...396bbe861f.jpg Sent from my iPad using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Cab and chassis are looking good. |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Are you going to xrmod the front axle or all of them to help with the turning radius? I guess so because of the 3 servos 149 r/c worx team driver |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Quote:
Quote:
The front axle is a narrowed wraith axle. All have beef tubes in them. I put together an xr mod axle and it was just too wide. Even with some 185 slw from locked up. |
Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Couple more coats of ps5 tamiya and then some flat enamel on the roof grill and wheel wells. http://uploads.tapatalk-cdn.com/2016...80b5e4b969.jpg Based on the issues I've had with the decals on the Brodozer I decided to paint in the patriot logo on this one...plus it's so simple. Printed it off on vinyl adhesive and cut out with xacto http://uploads.tapatalk-cdn.com/2016...051f364543.jpg Actually still waiting for paint to dry before I mask it so I started on the shocks. Going to run gmade piggybacks in 85mm length for the rear. Best part of these is the adjustment screw. Allows you to almost lock them when towing something heavy. http://uploads.tapatalk-cdn.com/2016...880c935110.jpg Sent from my iPhone using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig The body is turning out great. Like how this build is going. Can't wait to see the continued progress. |
Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Since there was such a big gap between the grill and the frame rails, I notched the front of the frame to go up about .75" http://uploads.tapatalk-cdn.com/2016...c77cd6d58b.jpg Then adds tabs for the front shock mounts. Using 4" gmade piggy backs. Probably need to go with something shorter. http://uploads.tapatalk-cdn.com/2016...fdc5dc9da7.jpg Now the front bumper fills the gap nice and clean. http://uploads.tapatalk-cdn.com/2016...0640262231.jpg I had to start on the bed. Since I want this thing to be functional I had to go out of the proportions of the 1:1 a little. A little wider and longer than the super6. My requirement was to be able to hold a 1.9 rig. In order to only add the weight I need. I am using aluminum and riveting it together. Started with some angle pieces that I'm using the shock mount tabs to mount to the chassis. http://uploads.tapatalk-cdn.com/2016...067b98b13b.jpg And building the outer frame with the same angle. http://uploads.tapatalk-cdn.com/2016...6858a39039.jpg Scx10 II fits! http://uploads.tapatalk-cdn.com/2016...71a581f392.jpg Next I sketched out some side panels for the bed rail. Came out pretty good on fit. Now I need to drill holes like the 1:1 http://uploads.tapatalk-cdn.com/2016...bbd14499b0.jpg Still need to figure out the headache rack and how I want that to look. Then add some stacks. Biggest thing now is getting the servos mounted on the axles and start figuring out electronics and battery placement. Sent from my iPhone using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Started on the front end to get it knocked out. Started with the bumper. I'm bolting it in rather than mounting solid. http://uploads.tapatalk-cdn.com/2016...2ab67f72cc.jpg The bumper I got from superdrty had a lot of mounting holes for things so I started by filling those in. The holes were done with brazing rod filler. I cut a rectangular piece of steel to fill the front light bar gap. http://uploads.tapatalk-cdn.com/2016...e39013769c.jpg http://uploads.tapatalk-cdn.com/2016...149a0a6def.jpg http://uploads.tapatalk-cdn.com/2016...727be490b5.jpg Next I got the servo and panhard mounted. With the narrow wraith axle it was just easier and I think it'll be more reliable than a custom servo mount. http://uploads.tapatalk-cdn.com/2016...f88aa8bbd1.jpg http://uploads.tapatalk-cdn.com/2016...ffec79a4ff.jpg Sent from my iPhone using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig may be a dumb question, but how do you get the center axle with two out puts?.... i thought i didnt want a 6x6 buttt this thing is sick mann. props to an awesome build, you couldnt have gone with a better tire either! -drew |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Quote:
Thanks man! It's not too hard. You need two scx 10 axle housings and two sets of gears. You use both output sides of the housings, shave the rib on the mating surface. Then use one complete ring and pinion with just the pinion from he other set. You can also now buy a pass thru for the wraith axle. It comes on the bomber diff cover parts tree. Same situation with the gears. The key to remember is that the output shaft of the pass thru axle spins the opposite direction of the input shaft. Therefore you either need to flip the rear or front axle upside down to get all 6 wheels going the same direction. Or use a wraith style housing (from axial or vanquish) that allows you to flip the gear direction inside the diff housing. Sent from my iPhone using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig I use an SSD axle housing for the rear axle. By design the diff is flipped, perfect for a 6x6 Sent from my LG-H900 using Tapatalk |
Re: Super Six - Diesel Sellerz F-550 6x6x6 SEMA Tow Rig Been able to knock things off on this rig off and on over the past few days. Had to customize a servo mount for the pass thru axle. http://uploads.tapatalk-cdn.com/2016...b8c9dfecee.jpg Got both rear axle servos mounted. http://uploads.tapatalk-cdn.com/2016...9f16acf9f2.jpg Then cut up the Maxx drive shafts to get the driveline out together. http://uploads.tapatalk-cdn.com/2016...7091b66882.jpg Started laying out the electronics. http://uploads.tapatalk-cdn.com/2016...e9da8c3080.jpg http://uploads.tapatalk-cdn.com/2016...f1d2d20e83.jpg I got the rig working just with the esc bec. It rips on 3s can't imagine on 4s. Once I wired in the bec. I made a huge mistake in how I wired it. And fried the ground wire on the pwm cable. http://uploads.tapatalk-cdn.com/2016...c727a8e582.jpg Not my finest moment. Luckily the rx and bec are fine. The esc actually still turns on, just don't know if it will work correctly. Put a mamba monster x on order. Just had to. Worked on the rear bed and sheet metal some today. Including putting some grip tape on the flat bed to hold tires secure. http://uploads.tapatalk-cdn.com/2016...51f4bcfecc.jpg http://uploads.tapatalk-cdn.com/2016...a0dd87df59.jpg http://uploads.tapatalk-cdn.com/2016...b71177c80e.jpg Holds the Nukizer pretty well. http://uploads.tapatalk-cdn.com/2016...38f0c6bfe9.jpg Lastly I Got the smoke stacks started. http://uploads.tapatalk-cdn.com/2016...c1ba2fc5c1.jpg Sent from my iPad using Tapatalk |
| All times are GMT -6. The time now is 02:49 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com