04-26-2017, 09:02 PM | #1 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| 6x6 SCX Bruder Wide Cab
So started with a Deadbolt roller from ebay and slowly started collecting parts ALTD896 6x6 chassis from ONETEN Proline front shocks SCX rears shocks CMS set-up- fitted stock axle servo plate to chassis with 3 link mount on axle RC4WD rear punisher shaft shortest type available 1.9 Treps 1.9 8 Hole wheels CI Deuce Wild Foams in front Hot racing trans gears HiTec servo Bruder Volvo Cab cut and widened roughly a inch or so to get close to full tyre cover Still working on the tray Last edited by PERCY; 07-20-2017 at 04:18 PM. |
Sponsored Links | |
04-26-2017, 09:14 PM | #2 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 08:35 PM. |
04-26-2017, 11:41 PM | #3 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 08:34 PM. |
04-27-2017, 01:50 AM | #4 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 08:40 PM. |
04-27-2017, 01:56 AM | #5 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 08:42 PM. |
04-27-2017, 04:01 AM | #6 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 08:44 PM. |
04-27-2017, 04:29 AM | #7 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| 6x6 SCX Bruder Wide Cab
Knocked up a dash to fill up the interior, first hard body build for me so just kept is simple. Cut up the original dash to take the passenger side compartment out and fit to the new dash to add a bit of detail to passenger side. Just made a little basic cluster of gauges old busted driveshaft female end came in handy as the ring. Last edited by PERCY; 02-28-2019 at 08:53 PM. |
04-27-2017, 07:03 AM | #8 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: 6x6 SCX Bruder Wide Cab
Nice job, i have been thinking about doing the same. But looks quite difficult to cut it so sharp and glue it. Verstuurd vanaf mijn GEM-702L met Tapatalk |
04-27-2017, 04:29 PM | #9 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab
I have never done a hard body before this one, I wouldn't say it's hard. Most difficult thing I had was to cut everything square both sides to keep it somewhat even
|
04-27-2017, 09:56 PM | #10 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 09:09 PM. |
04-30-2017, 08:44 PM | #11 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab
Painted the cab and rails took her for the maiden trail run. All went all ok no real issues I had a ball driving around with a mate Last edited by PERCY; 02-28-2019 at 08:48 PM. |
04-30-2017, 08:48 PM | #12 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Last edited by PERCY; 02-28-2019 at 09:11 PM. |
04-30-2017, 10:14 PM | #13 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: 6x6 SCX Bruder Wide Cab
Nice like it. Verstuurd vanaf mijn GEM-702L met Tapatalk |
06-28-2017, 07:05 PM | #14 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| 6x6 SCX Bruder Wide Cab
Bit of a update, pieced together a tray for this weekends run with local club. Basic but hey does the job Last edited by PERCY; 02-28-2019 at 09:04 PM. |
02-28-2019, 08:49 PM | #16 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab
Reloaded images for build
|
03-16-2019, 09:36 PM | #17 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab
Since reloading images got the motivation to get the Volvo out. Re mounted to chassis but with a reverse SCX ii gearbox slapped on wheels and tyres. Plan is for a trails truck style bed, here is the start Sent from my iPhone using Tapatalk |
03-19-2019, 04:20 AM | #18 |
Rock Stacker Join Date: Aug 2012 Location: AUSTRALIA
Posts: 87
| Re: 6x6 SCX Bruder Wide Cab Sent from my iPhone using Tapatalk |
6x6 SCX Bruder Wide Cab - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bruder Mack Granite 6x6 flatbed build | WesTX | Multi Axle Rigs | 22 | 05-19-2016 07:03 PM |
Thread Tools | |
Display Modes | |
| |