|
| LinkBack | Thread Tools | Display Modes |
12-09-2017, 03:32 PM | #1 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| HEMTT or similar body recommendations
I'm starting a new build and I'm looking at bodies. I'm not really up for building something from scratch. I've been searching around and found one body on ebay that looks ok but I was hoping for some more options. I'd love to get my hands on a capo tatra body or something similar. I like the idea of a metal body but I'm sure those are hard to come by. All input is welcome. |
Sponsored Links | |
12-10-2017, 09:30 AM | #2 |
RCC Addict Join Date: Feb 2010 Location: a house
Posts: 1,986
| Re: HEMTT or similar body recommendations
contact capo to see if they would sell you a body
|
12-10-2017, 12:56 PM | #3 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations |
12-10-2017, 04:32 PM | #4 |
Quarry Creeper Join Date: Apr 2013 Location: perkasie
Posts: 276
| Re: HEMTT or similar body recommendations
I have gotten a 1/10 hemtt body off ebay but there are other places that sell it google 1/10 hemtt is an assembled very detailed bidy made of styrene Sent from my SAMSUNG-SM-G891A using Tapatalk |
12-10-2017, 05:29 PM | #5 | |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations Quote:
| |
12-10-2017, 05:31 PM | #6 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations |
12-10-2017, 07:36 PM | #7 | |
Quarry Creeper Join Date: Apr 2013 Location: perkasie
Posts: 276
| Re: HEMTT or similar body recommendations Quote:
Sent from my SAMSUNG-SM-G891A using Tapatalk | |
12-11-2017, 04:01 AM | #8 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations |
12-11-2017, 05:37 AM | #9 | |
Quarry Creeper Join Date: Apr 2013 Location: perkasie
Posts: 276
| Re: HEMTT or similar body recommendations Quote:
Sent from my SAMSUNG-SM-G891A using Tapatalk | |
12-14-2017, 08:06 AM | #10 |
RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge)
Posts: 1,279
| Re: HEMTT or similar body recommendations https://rover.ebay.com/rover/0/0/0?m...2F253197249580 Here is the 8x8 body. Its what I started with for my mk48 build Sent from my iPhone using Tapatalk |
12-14-2017, 07:33 PM | #11 | |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations Quote:
I may be in need some measurements on the cab. Hope some of you can lend a hand. | |
12-14-2017, 09:30 PM | #12 |
RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge)
Posts: 1,279
| Re: HEMTT or similar body recommendations
The body in the link measured out to roughly 10.6:1 to 11:1 based on comparison with the 1:1 I measured. I can take measurements from my cab and you can math them whatever direction you want. I can also measure the 1:1, its about 30 minutes from my house Sent from my iPhone using Tapatalk |
12-15-2017, 04:23 AM | #13 | |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations Quote:
i'll try to take a pic and mark it up with the measurements i'm most interested in but here is my attempt at describing them. I'm just interested in the cab because i'm going to be making a customer rollback flatbed. full cab length (front of skid to back of engine compartment) full cab width (door to door) cab length (front skid to front of fenders) cab height (at the doors) cab height above fenders (i.e. the engine compartment height) engine compartment width | |
12-15-2017, 06:20 AM | #14 | |
RCC Addict Join Date: Mar 2007 Location: St. Louis (High Ridge)
Posts: 1,279
| Re: HEMTT or similar body recommendations Quote:
Im working with the mk48 instead of a hemtt, which moves stuff all around to get the fuel tanks on top of the fenders instead of on the belly but Ill measure what I can. Cab length overall: on the original body I think something like 11.5. My mk48 is about 13.75 Cab width: without mirrors 8.75 the 1:1 is 96 Cabin length: the body kit is 5.75 from front bumper to back of cab, 5.15 from front of cab to back of cab. The kit differs from the mk48 because there is a cab extension that goes on to the flat of the fender. The real cab ends at the 45° part of the fender. That length from front of cab is 4.3 Cabin height from roof peak to floor board is 6 the step is almost 7 and the front bumper bottom is 6.75from the roof Engine cover height: from fender is 4 Flat part of fender: 8.5 long Angled parts of fender: 2 long Engine cover width: 4.75 Front of truck:the bottom angle is 45° and 2.375, the vertical is 1.25, the windshield is about 60° and 3.25 Sent from my iPhone using Tapatalk | |
12-15-2017, 05:36 PM | #15 | |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,598
| Re: HEMTT or similar body recommendations Quote:
| |
HEMTT or similar body recommendations - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Body recommendations? | Freakshow185 | 1.9 Scale Rigs | 6 | 11-20-2013 11:20 PM |
Thread Tools | |
Display Modes | |
| |