|
| LinkBack | Thread Tools | Display Modes |
05-23-2015, 05:39 AM | #1 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| WesleyRoy's SCX10 6x6 bullhead to 8x8 recovery truck
Hello, so this is my first 6x6 build, and also first hardbody paintjob. Bought is as a new Deadbolt SCX10. The famous bullhead body. First try with styrene. Some aluminium to hold the body on the rear. Didnt make some holes in the body so i glued a little brace for the front. After a lot of primer and a lot of paint, wow i didnt knew it would take some much paint, especially when you are used to paint lexan body's Some carbon. Some aluminium links from Hot Racing.. hmm maybe i should have bought original Axial links, these feel a bit hmm toygrade. Ordered some wheels, they go by four, so i got some spare wheels. Tried to mount the maxxis trepadors but it didnt work out, i couldnt mounted the beadlocks. On this foto it is not mounted, just loose. Ordered Mud Basher tractor style tyres. I considered the Mil spec tyres but i read some negative reviews about it, however these look very scale. I really like this 6x6 so i bought the tractor tyres. I ordered a donor scx10 chassis wich should come this afternoon, for the extended chassis. Maybe in the future when it gets scratches and gets damaged i go for a weathered look. For now i like the shine and the bling. Last edited by WesleyRoy; 03-16-2018 at 01:26 PM. |
Sponsored Links | |
05-23-2015, 02:39 PM | #2 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Received the donor chassis/roller. Dropped in a 45turns Holmes sport motor, with stock Deadbolt gearing. Extended the frame rails. |
05-23-2015, 10:19 PM | #3 |
Rock Crawler Join Date: Jul 2008 Location: Pearland, TX
Posts: 595
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Looking forward to seeing your progress. About to start a 6x6 build myself. Wes |
05-24-2015, 05:16 AM | #4 |
Rock Crawler Join Date: Jan 2013 Location: Australia
Posts: 607
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Looks nice so far, like the colour choice what are the plans for the bed?
|
05-24-2015, 05:16 AM | #5 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Thanks, looking forward to your 6x6 build tread also.
|
05-24-2015, 12:35 PM | #6 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
I am considering a flat bed, not to difficult because its my first custom build. I was trying to use this build as a guideline.. Axial Racing - Custom 6×6 SCX10 However, i want the 2nd and 3rd axles closer to each other. Build the pass tru axle. With the links adviced in the Axial build. Axles to far from each other. I would like it like this, maybe a little more space. I tought about mounting the upper links to the chassis, but it hits the cross braces (on the photo it's just 2 braces, it will have 4 braces). I have to keep in mind the tyres i will gonna use have a smaller outer diameter. So i have to wait for the tyres to come in.. Also bought some more links to use as chassis braces. Measuring is my weak point so this build is a big learning point for me. I also going to look for a tapping screw set. I have a bunch of Wraith aluminium links i dont use anymore because i got titanium on them, so i can cut and tap them for my 6x6. Whats the best way to mount the upper links from the 3rd axle, is it better to mount them on the chassis? ANd how do i circumvent that the upper links bind with the chassis braces.. hmm maybe i have to bent them.. I see that the lower links are connected between the 2nd and 3rd in many builds, so i think i go install them like that. Last edited by WesleyRoy; 05-24-2015 at 12:39 PM. |
05-24-2015, 02:51 PM | #7 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Whats the best way.. mount a 4link on the 3rd axle or a 3 link on the 3rd axle. Like this example has a 3 link. |
05-25-2015, 12:30 AM | #8 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
I am considering to go for a 3 link on the 3rd axle, i've heard this wel decrease the side movement of the 3rd axle.
|
05-25-2015, 11:11 AM | #9 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Removed the braces (it was binding with the 3 link), cut the screws to the right length and locktide them. I really liked it like this. However it got some problems with making a shaft with a length from 55mm Anybody have experience with punisher shafts. The shortest is 65mm it would put the tyres around 2,5 cm closer to eachother.. with just 1,5cm between eachother. Last edited by WesleyRoy; 05-25-2015 at 12:21 PM. |
05-27-2015, 07:06 AM | #10 |
Pebble Pounder Join Date: Jun 2013 Location: Espoo, Finland
Posts: 150
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
I use SDI 4x4 (from Spain) drive shafts both in my 6x6 at the rear (about a 4 kg truck) and also in a 4 kg Gelände 2. They hold up better than ANY other drive shaft (metal or plastic) I've tried at the 6x6 rear. The best thing about the SDI drive shafts is that they are user-shortenable, so you can make any length you wish, and the joints are very small (but very durable) that the overall length can be very short. To shorten the drive shaft I had to use a Dremel because I couldn't even dent the shaft with a regular metal saw. Tells something about the quality of the steel they are using (..or the dullness of my saw blade). Here's my 6x6 rear axles: https://dl.dropboxusercontent.com/u/...6_sdi_side.jpg https://dl.dropboxusercontent.com/u/...x6_sdi_top.jpg And in the Gelande 2 (IMO looks very scale): https://dl.dropboxusercontent.com/u/...sdi_shafts.jpg Hope this helps. |
05-27-2015, 07:47 AM | #11 |
I wanna be Dave Join Date: Aug 2008 Location: Austin, TX, USA
Posts: 4,273
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
FYI, the picture you posted earlier of a 3-link is really a 4-link. It's deceptive because there's only one mounting point on the top of the axle, but that's really considered a 4-link setup, for all practical purposes. Converting it from a "Y" upper mount to two individual mounts (one for each upper arm) would just yield different suspension geometry, but for a rig like this I think you'd be just fine. |
05-27-2015, 09:23 AM | #12 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Thanks for the advice. I ordered cheap version 1 Axial SCX10 shafts, they can be shorten more the the Wild boar axles. If that doesnt work i might go for the sdi axles but can they be shorten to 55 mm? I've heard that a v-link mount better is, for a 6x6 because otherwise you will got to much sidemovements from the axles. So i will try the v-link mount first. 50's Theme I really like the 50's colors, logo's etc. So i think i will go for a bit of 50's look. Dont care the Bullhead body isnt typically 50s THat's why i go for the white wheels. A friend of my wife is going to redesign a vintage logo based on this example. Thinking about a flatbed with a 50s look Midnight Pumpkin on the flatbed. Oke i think the look isnt really offroad minded, but it is something different . Last edited by WesleyRoy; 05-27-2015 at 09:29 AM. |
05-27-2015, 09:47 AM | #13 |
Pebble Pounder Join Date: Jun 2013 Location: Espoo, Finland
Posts: 150
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
> If that doesnt work i might go for the sdi axles but can they be shorten to 55 mm? The space between the outer bearings on my 6x6 is 66 mm. The axle could be shortened by some 6 mm. Which I might even do because I like to have the least amount of space between the rear tires. |
05-27-2015, 12:14 PM | #14 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Oke thank you.
|
06-02-2015, 10:15 AM | #15 | |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build Quote:
| |
06-02-2015, 11:39 AM | #16 |
I wanna be Dave Join Date: May 2008 Location: Baltimore
Posts: 4,442
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
When I built a 6x6 a few years ago, the short shaft between the rear drive axles was my biggest headache. Not only because of the short length, but also because of the amount of travel between the 2 axles. If one axle was fully compressed and the other was fully drooped, the shaft would pull apart. I ended up having to limit the amount of suspension travel of middle axle a bit, this not only solved the drive-shaft issue it also solved the u-joint binding issue of the main drive-shaft going to the middle axle. It was difficult to keep both outputs as level as possible through out the suspension cycle. |
06-02-2015, 12:01 PM | #17 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Thanks for the advice. I ordered the SDI shafts and also ordered some 60mm super scale shocks from RC4wd so i can mount the shocks straight on the chassisrails for a clean look. Like this one. I dont like it when the bed is raised op because of the stock shockhoops. The shorter schocks will decrease some movement i guess, between the 2nd and 3rd axle. I mean less travel because of shorter shocks. Last edited by WesleyRoy; 06-02-2015 at 12:05 PM. |
06-03-2015, 01:37 PM | #18 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Received my tires. Ordered these shocks, to mount straight on the frame rails. SO i can loose the shockhoops. Ordered the SDI shafts as adviced to me earlier. |
06-13-2015, 11:54 PM | #19 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Yesssss! It looks like i finally sorted out the links and driveshaft between the middle and rear axle. I looked a lot at other builds. And sort of copied the setup from HDMM's Recovery Build. HDMM's 6x6 Recovery Truck Build Removed the shock hoops and installed 70mm Scale Super Shocks from RC4wd. How it looked first. How it is now. Changed the links to a four link. ANd mounted lower links at the chassis. In my search for " something" to put on the flatbed (i still have to make) i found this Harley Davidson in 1/12 scale, the more standard 1/18 motorcycles where to small. I used a SDI driveshaft for the rear shaft. Driveshaft doesnt falling apart anymore. Hopefully i can get an hour test drive today at the forrest. Last edited by WesleyRoy; 06-14-2015 at 01:09 AM. |
06-14-2015, 12:23 AM | #20 |
Pebble Pounder Join Date: Sep 2012 Location: Kansas City
Posts: 148
| Re: WesleyRoy's SCX10 another 6x6 bullhead build
Lookin good!
|
WesleyRoy's SCX10 another 6x6 bullhead build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bullhead Body Military 6x6 Build | TrailSnail | Multi Axle Rigs | 24 | 08-31-2020 12:01 AM |
WesleyRoy's SCX10 Jeep JK | WesleyRoy | Axial SCX-10 | 7 | 03-19-2017 12:43 PM |
Yota 2 K2 6x6 Bullhead | UneekSole | Multi Axle Rigs | 1 | 11-09-2014 08:02 PM |
Bullhead 6x6 | CydStrange | Scale Videos! | 0 | 11-23-2012 06:18 AM |
Thread Tools | |
Display Modes | |
| |