RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Nebraska (http://www.rccrawler.com/forum/nebraska/)
-   -   Questions (http://www.rccrawler.com/forum/nebraska/138116-questions.html)

froboy 10-02-2008 03:00 PM

Questions
 
Which tires are better? Losi, Axial or Hammers?

What shock oil should I start with for a 2.2 crawler?

Is a dig worth it, and does it prevent me from competing in a specific class?

I've heard people say not to use digital servos, but I'm sponsored by JR and have several 9100T's lying around. What's wrong with digital servos, or is it just less torquey digitals that I don't want to use?

Help a brother out.

Jkelley 10-02-2008 03:05 PM

I use hammer tires but I've heard great things about losi's. I'm sure you want hear a whole lot of nice things about the stock axial lizard tires. I think there ok. For shock oil I use 50 wt. but its all preference. I also use a Jr Servo and I love it but its not digital, so I dont know what to tell you good or bad on that. Dig is worth every penny if set-up right.

sniders1975 10-02-2008 06:41 PM

Alex use the servo i have had no problems with the hobbico but i did get a spectrum also, Lots of torque

kwkride 10-02-2008 07:15 PM

Tire preference is a lot of personal choice. It also depends on the terrain that you're trying to crawl over. I have had good luck with the Losi Rock Claws. There has been an awful lot of positive feedback about the Panther Cougars lately too.

froboy 10-06-2008 12:01 AM

Dude, my crawler looks great...

kwkride 10-06-2008 05:10 AM

Quote:

Originally Posted by froboy (Post 1371328)
Dude, my crawler looks great...

Where's the pics then?!? "thumbsup"

Knucklehead 10-22-2008 08:07 AM

http://www.revo-world.com/forums/ima...s/needpics.gif

froboy 10-22-2008 08:45 AM

It was a question thread, but I'll post picks of my crawler when I'm finished with it. :)

Knucklehead 10-22-2008 08:56 AM

BTW, I may have a cable that will work for your camera. I will try and stop at the Plex either tonight or tomorrow night. "thumbsup"

kwkride 10-22-2008 09:00 AM

Quote:

Originally Posted by froboy (Post 1392858)
It was a question thread, but I'll post picks of my crawler when I'm finished with it. :)

Your not done yet? C'mon hurry up! :-P

DeweyCJ5 10-22-2008 11:37 AM

Quote:

Originally Posted by Knucklehead (Post 1392821)

well said

sniders1975 10-23-2008 08:25 PM

Alex if you are going to be at the plex on sunday bring your crawler so we can see it, I will bring those wheels & just pay me whenever you can!

Lesac 10-27-2008 09:11 AM

Ya alex's crawler looks pretty BA, however mine will be even better. lol

froboy 01-11-2009 07:53 PM

So, I broke my first part today on The Plex indoor course.

Not a c-hub, or a spindle. or even a shock or something...

But my Delrin bottom skid plate!

Pretty awesome. I'm definately getting an aluminum one now.

I can't wait for Tuesday to do some more.

Lesac 01-11-2009 08:10 PM

did you break the strc one???
i did the same thing.

froboy 01-11-2009 09:05 PM

Yep...damn it.

stampedeproject 01-11-2009 10:00 PM

http://stampedeproject.com/RC-CAR-M/12-08-Cover.jpg

Pull the December 2008 issue of RC Car and see the Tire test, Scott Hughes, Pete Bach (Dirk Digler) and myself did.

Yep there is no magic pill, however based on my preferences and well over a couple month of analytical tire testing I will be going with Pro-Line Badlands. Again just personal preference.

At least you can see where each excelled and was weak.

Dig is worth it if you are going to compete... at least according to everyone I have every talked with. I have had more than a few people that have said that the Nationals course was impossible without dig and Gerame and Tom both indicated that they were at a disadvantage without dig at Crawlapoloza . I have the older VF/DNA dig unit which is very good, but lots of guys still compete without them.

JavelinSST390 01-11-2009 10:18 PM

For the white rock on the outdoor course, I've found the flatiron's work very well.

But for a good, all-around tire you just can't go wrong with Losi Claws...

DeweyCJ5 01-12-2009 03:33 AM

hey fro how and where did it break ? i was thinking of getting one of those...maybe not now

froboy 01-12-2009 10:41 AM

I don't actually know. I just looked underneath and it was split. I'm ordering aluminum ones for the store and for myself.


All times are GMT -6. The time now is 08:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com