eritex dig Hello all. I finally have my GC3 chassis assembled. The standard servo is too big for the narrow chassis. Will a mini servo fit on the eritex servo mount? It's the front to back dimension thats too big. Length and height are are fine. |
Re: eritex dig i don't know if the mini servo will have enough pull for it |
Re: eritex dig i had read that the minimum is 50 oz. for the dig. I found a tower hobbies mini servo that puts out 63 oz. That does seem a bit weak though. |
Re: eritex dig The mini servo will work fine. That's what's on mine. It just has to be able to move the arm, It isn't held in place by the servo. |
Re: eritex dig great news. thank you Jim. Is there a different mount for a mini? |
Re: eritex dig Nope, it's the same one. |
Re: eritex dig Great! Thanks again Jim |
Re: eritex dig You might look for a used Futaba S9551 servo if you find yourself displeased with the mini servo power. |
Re: eritex dig That futaba looks like the dimensions will work. And great torque as well. Thank you for the advice |
All times are GMT -6. The time now is 02:32 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com