Go Back   RCCrawler Forums > Regional > Midwest > Nebraska
Loading

Notices

Thread: Nebraska Crawlers

Reply
 
LinkBack Thread Tools Display Modes
Old 08-11-2008, 06:35 PM   #41
Rock Stacker
 
Join Date: Aug 2008
Location: Lincoln
Posts: 86
Default

Actually I do. I have talked to several people who do for independent 4 wheel steering and to run independent front and rear motors. I even read and article (forget which one) where they were using the new RDS8000 on a crawler (Scorpion I think). Besides, so many people are going to 2.4 the older ones will have less interferernce. Ok, let the bashing begin.

Last edited by tk5028; 08-11-2008 at 06:50 PM.
tk5028 is offline   Reply With Quote
Sponsored Links
Old 08-11-2008, 06:50 PM   #42
RCC Addict
 
Join Date: Nov 2007
Location: in the woods
Posts: 1,915
Default

As long as it is a 2.4(Spectrum) radio you are fine. Actual air designated frequencies are a no no.


Here is a list



Band Uses
27 Mhz RC Models and Toys (in UK, CB-band)
35 Mhz RC Aircraft (UK & Spain)
40 Mhz RC Surface Vehicles (UK & Spain)
70.5 - 71.5 Mhz Fire Service Mainstream (UK)
72 Mhz RC Aircraft (USA & Canada)
72.8 - 76.7 Mhz MoD (UK)
75 Mhz RC Vehicles (surface) (USA & Canada)
75 Mhz CAA ILS runway marker beacons
87.5 - 108 Mhz Commercial & Pirate FM Radio
108 - 137 Mhz Air Band
137 - 165 Mhz Mid Band (inc. Police)
165 - 174 Mhz Marine Band
230 - 400 Mhz NATO reserved
400 - 470 Mhz UHF 1 & 2 (Television and RC)
446 Mhz PMR (EU commercial walkie-talkie, not USA)
1.2 Ghz CCTV
2.4 Ghz WLAN, CCTV
4.3 Ghz WLAN
5.0 Ghz WLAN (high performance)


IEEE 802.11 Standard(s)
2.4 Ghz 802.11b (5-11Mbs)
802.11g (25-54Mps)
5.0 Ghz 802.11a (25-54Mbs)
802.11n (100-200Mbs)


Something else to look at...
http://rcsource.hobbypeople.net/faqs/freqlist.htm

Last edited by Eritex Inc.; 08-11-2008 at 07:03 PM.
Eritex Inc. is offline   Reply With Quote
Old 08-11-2008, 07:15 PM   #43
RCC Addict
 
Join Date: Nov 2007
Location: in the woods
Posts: 1,915
Default

By no means am I bashing. It is an FCC rule that certain frequencies are designated for certain things.

I would hate to see a 4 pound RC plane get hit by a radio being used on the ground. That 4 pound airplane moving at 60mph+ with a blender on the front of it could really hurt someone.

Better to just abide by the rules.
Eritex Inc. is offline   Reply With Quote
Old 08-11-2008, 07:56 PM   #44
Rock Stacker
 
Join Date: Aug 2008
Location: Lincoln
Posts: 86
Default

Eritex, you are correct. And just to make a friendly point, I never mentioned which radio I had. It could have been a 2.4. And I too would hate for anyone to get injured. However, this is a temporary situation. With two kids in private school, a wife in grad school, and I am off work in the winter it is going to take long enough just to get everying thing else. I am planning on another radio. Probally the RDS8000 then no more worries. I'm not worried because I will be just in my back yard and I know I will not have to worry about any aircraft.

And just curious, you listed all the different freq's. I have been wondering anyways, with the newer 2.4 Ghz radios, how can they get away with it since others use the same?
tk5028 is offline   Reply With Quote
Old 08-11-2008, 08:13 PM   #45
RCC Addict
 
Join Date: Nov 2007
Location: in the woods
Posts: 1,915
Default

This can explain much better and faster then I....

http://www.spektrumrc.com/DSM/Technology/spekTech.aspx
Eritex Inc. is offline   Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com