4 the love of rock, comp#3 scale adventure series

[greggreg2011]

well i can finally start charging batts and gettin the cc ready. dam main water pipe to the house exploded at the meeter. needless to say its handled now.

and d last comp lasted i wanna say like 4 n a half hrs or so. think there was like 15 of us or so

[Jahred59]

Damn I'm out. My new ESC I just got, something fried while I was backyard crawling. It has no forward movement what so ever. Well I could switch around the wires from the motors but I'll have no reverse. Unless someone has a cheap ESC for sale?

[Erbing]

Originally Posted by Jahred59

Damn I'm out. My new ESC I just got, something fried while I was backyard crawling. It has no forward movement what so ever. Well I could switch around the wires from the motors but I'll have no reverse. Unless someone has a cheap ESC for sale?

You just got that esc not even a month, that sucks. you can can take pics for us if you want..

[greggreg2011]

Originally Posted by Jahred59

Damn I'm out. My new ESC I just got, something fried while I was backyard crawling. It has no forward movement what so ever. Well I could switch around the wires from the motors but I'll have no reverse. Unless someone has a cheap ESC for sale?

your esc needs to power 2 motors rite

[greggreg2011]

Originally Posted by Jahred59

Damn I'm out. My new ESC I just got, something fried while I was backyard crawling. It has no forward movement what so ever. Well I could switch around the wires from the motors but I'll have no reverse. Unless someone has a cheap ESC for sale?

does it need to have dual motor plugs? if it only needs 1 set you can use this 1 i have spare and if it blows up its no biggie. its the esc that powers the 2.2 hpi crawler king

::HPI RACING:: - Crawler King

::HPI RACING::

let me know if you can use it and if so let me know what type of battery connector you need on it so i can solder 1 up

[Jahred59]

Hey Greg, I have deans plugs on my batteries. I just need to make a Y connector to run the motors in parallel off that ESC. What kind of connectors do you have on the ESC motor wires

[greggreg2011]

Originally Posted by Jahred59

Hey Greg, I have deans plugs on my batteries. I just need to make a Y connector to run the motors in parallel off that ESC. What kind of connectors do you have on the ESC motor wires

just regular bullet plugs. ill solder on a deans. i can solder on another set of bullets also if thats what you need

[TheReno]

Im in.

[greggreg2011]

sweet reno---and jahred59 ill solder deans to batt wire now. and were you saying you will make the y for the motors or do i need to make a y

[Jahred59]

Im making a Y adapter right now. Thanks greg you're the man!

[greggreg2011]

Originally Posted by Jahred59

Im making a Y adapter right now. Thanks greg you're the man!

no prob. the wire to plug into the reciever on this thing is only really only like 4 inches long so if you need more let me know while ive got the solder gun hot.

and ill bring another spare esc with for backup as well witch has bullets for motor and ill add a deans to it now to just in case.

and ill be gettin out there early with anthony-not sure what time yet though but if your a lil early ill be there and you can get hooked up

[doublej]

Originally Posted by Rivas Concepts

That will be cool. Do you have lots left on the wraith.

Full wiring and very little wrenching. But im still waiting on replacent shafts from axial. The short sides were mis machined. Just havent had time with friends in town.
Is this place easy to find.

[greggreg2011]

Originally Posted by doublej

Full wiring and very little wrenching. But im still waiting on replacent shafts from axial. The short sides were mis machined. Just havent had time with friends in town.
Is this place easy to find.

7121 east lake mead blvd las vegas nv, 89156 not to far past this gas station

[Jahred59]

Thats fine greg it should work.

[sandbaggerAx10]

jahred I will bring a back up for the back up plan of esc. I hope my axles make it. Been working on other projects other than my crawler.. Dakar is ready to go. I hope. lol

[sandbaggerAx10]

Originally Posted by doublej

Full wiring and very little wrenching. But im still waiting on replacent shafts from axial. The short sides were mis machined. Just havent had time with friends in town.
Is this place easy to find.

Shafts? If its drive shafts you can use Traxxas Rustler ones..

[doublej]

Originally Posted by sandbaggerAx10

Shafts? If its drive shafts you can use Traxxas Rustler ones..

no the axle shafts - one side was drilled wrong for the pin, the other was machined wrong on the bearing seat. the rears are a known problem, the front on the other hand was a bit odd.

[Rivas Concepts]

My cell phone is MIA, so I will see everyone at the comp site. Here is some trail riding into the night..!

http://http://youtu.be/-zmcdyQL3qY

[greggreg2011]

Originally Posted by sandbaggerAx10

jahred I will bring a back up for the back up plan of esc. I hope my axles make it. Been working on other projects other than my crawler.. Dakar is ready to go. I hope. lol

a back up for the back up..nice...i only found 1 male deans so 1 esc is ready the other needs deans

[greggreg2011]

remember for anyone who doesnt know or is new. sunrise mtn is the spot....Crawl Spots - Google Maps and heres the address of the gas station close by 7121 east lake mead blvd las vegas nv, 89156...comp spots not to far past this gas station

my cells up for invasion 1-815-354-8054