05-31-2008, 07:11 PM | #1 |
Newbie Join Date: May 2008 Location: Silverton
Posts: 17
| Upper Link Length ?
just wondering what length of tubes you guys use to extend your upper links so I can run 4 link instead of the 3 link. I'm getting ready to drill the extra holes on the chassis and I'm ordering the servo plates from TCS. Also do I gotta get new rod ends? any info is much appreciated |
Sponsored Links | |
06-01-2008, 09:34 AM | #2 |
Quarry Creeper Join Date: Aug 2006 Location: Baumholder
Posts: 477
|
first off we need to know what type of truck you are talking about. if you are talking about an axial with stock chassis plates and no holes drilled in the sides then the upper links will be fine with the plates that is what i was running before i got the copperhead chassis. as for rod ends it should be on your parts tree.
|
06-01-2008, 11:05 PM | #3 |
Newbie Join Date: May 2008 Location: Silverton
Posts: 17
|
sorry about that, yes it is the Axial and I will be drilling the new holes in the stock chassis and will be getting servo plates so I can mount my upper links separate rather than the stock Y link if that makes any sense?
|
Thread Tools | |
Display Modes | |
| |