Steering wount work!
 

I just got my tq3 in, i have been using my tq2 for the last couple days and its been doing fine. I can get throttle with my tq3 as long as the steering servo isnt plugged in right beside it. My esc is plugged into channel two and it works as long as the servo is in the "b" slot. But if its in channel one nothing works. Any idea to what is wrong?

Thanks

Sounds like the esc bec isn't stout enough for the steering servo, or the steering servo is toast. If you have a rx batt pack to troubleshoot with, you might try removing the red wire from the esc plug and see if that solves your problem.