RCCrawler Forums

Greg_Volkman · 03-05-2006, 06:04 PM

Just got my heep - this was the first run this morning:

Entering a canyon:

The second obsticle:

exiting the canyon (wheel stand):

Ouch, flopped it on it's side!:

MadMaxima · 03-05-2006, 10:27 PM

so far i've just repainted it, i wanna try it out stock to compare after some mods. Its sitting next to its little brother, the green one in the back has working head and tail lights too.

i was hesitant about the tan and brown but i think it came out beautifully

MilesToEmpty · 03-05-2006, 11:12 PM

Here's my Jeep I got before Xmas... still havent received my replacement chassis ><

Here's my Scorpion which I got last week in February... Now I have one for me and my girlfriend.

nfan04 · 03-11-2006, 12:47 PM

This is the current condition. In progress of adding skid plates and some other minor detailing. Any one with suggestions send them my way.

westbound808 · 03-14-2006, 01:17 PM

jeep pictures

rc180 · 03-15-2006, 10:36 PM

I converted my RC Crawler to a Bronco by using the body off of a WalMart sale Special. The original Jeep body was butchered to provide support for the new body. The lights operate on an independent battery salvaged from the WalMart Bronco. The three lights on the front are Ram RC lights mounted on a stick made from an old bath towel bar. I am also working on wheel adapters for Kong Swamper tires.

Thanks for the help and advice on posting pictures. Someday when I get better at using the bulliten board, I will learn how to properly reply to mail.

Wing Nut OOA · 03-22-2006, 09:35 AM

well here she is...

just got it last night, battery is still charging. all i've done is take the plastic inserts
out of the tires. not sure how thats gonna work, may end up putting them back in

anyone know where i can get a 1/6 cherokee body?

TwistedXT · 03-29-2006, 11:43 AM

_Natchez_ · 03-29-2006, 03:12 PM

REAR STEER

miller · 03-30-2006, 01:51 PM

There's some cool rigs here. This is my contribution to Toyota fans like myself.

Build Thread here:

How to convert your Jeep TJ to a Toyota Landcruiser

drumfreak77 · 04-02-2006, 12:09 AM

Lookin for some one to crawl with.
One modified, one stock for now.
www.rcpics.net/member/drumfreak77

TheRumbleFish · 04-08-2006, 09:37 PM

Here's my Jeep. I've got a Scorpion too but haven't opened it and I'm thikning about selling it since I don't think I need it.

So far the only mods I've done are a paint job and reversed tires with trimmed lugs.

kawicrazed_125_05 · 04-11-2006, 11:14 PM

Here is just a few pics of my rig that i thought i would throw in the gallery

Wrecker · 04-13-2006, 07:37 PM

JEEPTJ · 04-17-2006, 12:02 AM

Mods:
Paint
Triangulated shocks front and rear
Flipped and cut tires

Future Mods:
Tummy tuck
Some fabrication like metal rocker panels/ skids

JEEPTJ · 04-17-2006, 06:59 PM

the smaller one is a friends

Above: this was the only one posed.

Icebreaker88 · 04-19-2006, 01:25 AM

One is mine the other is for my 2 boys (probably gonna get the younger one his own too).
My mods so far are TT, Extended WB, Relocated the shocks, cut & reversed tires. I want to cut and trim the axles but have not got that far yet. And will be painting and doing some body work soon.

This is the newly built rock garden the wife built for us in the backyard to keep us out of her flower bed. (hey they had nice ledges).

bigcat280 · 04-21-2006, 01:09 PM

Mt 1st 1:6. Just paint done for now. More mods to come.

bigcat280 · 04-21-2006, 01:48 PM

A buddy of mine wanted me to post his 1:6 up. All he has done is put an Avalanche body on it. He is planning on doing a tummy tuck on it tonight, so I will have more pics soon.

STANG KILLA SS · 04-22-2006, 09:41 PM

just finished painting and re assembling her last night.

i painted the:
hood
rear deck
windsheild surround
center console
gauges
shifters
seats
belts
buckles
headlights
turnsignals
steering wheel
wheels
and wheel "bolts"

took some vids on my digi. only had a 128M card and it only takes like 20 seconds max. but i got a few on the card. i went easy on the obsticals cause i didnt want to get caught getting stuck on camera

so its some easy crawlin. but cool none the less

i think u can choose "origonal" size to get a better vid..
well i only have room to host 2 of the vids :(
http://media.putfile.com/NYLINT-1
http://media.putfile.com/nylint-2

next i triangulated the rear shocks and ground all the limiting tabs front and rear and clearanced the arms....(rotozip bit in the dremel made this MUUUCH easier...)

then it was time to scratch her up and get her dirty!!!

03-05-2006, 06:04 PM	#101
Greg_Volkman Newbie Join Date: Feb 2006 Location: California Posts: 4	mine Just got my heep - this was the first run this morning: Entering a canyon: The second obsticle: exiting the canyon (wheel stand): Ouch, flopped it on it's side!: Last edited by badger; 03-05-2006 at 08:51 PM.

03-11-2006, 12:47 PM	#104
nfan04 Newbie Join Date: Feb 2006 Location: Lebanon, Pa Posts: 3	Photos of my Ntlint 1:6 This is the current condition. In progress of adding skid plates and some other minor detailing. Any one with suggestions send them my way.

03-14-2006, 01:17 PM	#105
westbound808 Newbie Join Date: Mar 2006 Location: hawaii Posts: 1	jeep photos jeep pictures Last edited by TwistedXT; 03-30-2006 at 03:17 PM.

03-15-2006, 10:36 PM	#106
rc180 Newbie Join Date: Mar 2006 Location: san diego Posts: 2	2007 Bronco RC Crawler I converted my RC Crawler to a Bronco by using the body off of a WalMart sale Special. The original Jeep body was butchered to provide support for the new body. The lights operate on an independent battery salvaged from the WalMart Bronco. The three lights on the front are Ram RC lights mounted on a stick made from an old bath towel bar. I am also working on wheel adapters for Kong Swamper tires. Thanks for the help and advice on posting pictures. Someday when I get better at using the bulliten board, I will learn how to properly reply to mail.

03-30-2006, 01:51 PM	#110
miller Rock Crawler Join Date: Dec 2005 Location: North Vancouver Posts: 524	My Toy.........ota. There's some cool rigs here. This is my contribution to Toyota fans like myself. Build Thread here: How to convert your Jeep TJ to a Toyota Landcruiser

03-05-2006, 10:27 PM	#102
MadMaxima Rock Stacker Join Date: Feb 2006 Location: Las Vegas Posts: 60	so far i've just repainted it, i wanna try it out stock to compare after some mods. Its sitting next to its little brother, the green one in the back has working head and tail lights too. i was hesitant about the tan and brown but i think it came out beautifully

03-05-2006, 11:12 PM	#103
MilesToEmpty Rock Stacker Join Date: Dec 2005 Location: Severn Posts: 61	Here's my Jeep I got before Xmas... still havent received my replacement chassis >< Here's my Scorpion which I got last week in February... Now I have one for me and my girlfriend.

03-22-2006, 09:35 AM	#107
Wing Nut OOA Newbie Join Date: Mar 2006 Location: Oregon Posts: 28	well here she is... just got it last night, battery is still charging. all i've done is take the plastic inserts out of the tires. not sure how thats gonna work, may end up putting them back in anyone know where i can get a 1/6 cherokee body?

03-29-2006, 11:43 AM	#108
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622

03-29-2006, 03:12 PM	#109
_Natchez_ Newbie Join Date: Feb 2006 Location: Chesapeake Posts: 5	REAR STEER

04-02-2006, 12:09 AM	#111
drumfreak77 Newbie Join Date: Mar 2006 Location: Sussex Posts: 3	My Crawlers Lookin for some one to crawl with. One modified, one stock for now. www.rcpics.net/member/drumfreak77

04-08-2006, 09:37 PM	#112
TheRumbleFish Newbie Join Date: Apr 2006 Location: Tampa Posts: 38	Here's my Jeep. I've got a Scorpion too but haven't opened it and I'm thikning about selling it since I don't think I need it. So far the only mods I've done are a paint job and reversed tires with trimmed lugs. Last edited by TheRumbleFish; 04-15-2006 at 02:00 AM.

04-11-2006, 11:14 PM	#113
kawicrazed_125_05 Rock Stacker Join Date: Jan 2006 Location: Marysville Posts: 62	Here is just a few pics of my rig that i thought i would throw in the gallery

04-13-2006, 07:37 PM	#114
Wrecker [HOONIGAN] Join Date: Nov 2005 Location: Grand Junction Posts: 4,269

04-17-2006, 12:02 AM	#115
JEEPTJ Rock Stacker Join Date: Apr 2006 Location: Georgetown Posts: 53	pics of my rig Mods: Paint Triangulated shocks front and rear Flipped and cut tires Future Mods: Tummy tuck Some fabrication like metal rocker panels/ skids Last edited by JEEPTJ; 04-17-2006 at 08:31 PM.

Sponsored Links

04-17-2006, 06:59 PM	#116
JEEPTJ Rock Stacker Join Date: Apr 2006 Location: Georgetown Posts: 53	New in action the smaller one is a friends Above: this was the only one posed. Last edited by JEEPTJ; 04-18-2006 at 11:49 AM.

04-19-2006, 01:25 AM	#117
Icebreaker88 Newbie Join Date: Apr 2006 Location: Warren Posts: 15	One is mine the other is for my 2 boys (probably gonna get the younger one his own too). My mods so far are TT, Extended WB, Relocated the shocks, cut & reversed tires. I want to cut and trim the axles but have not got that far yet. And will be painting and doing some body work soon. This is the newly built rock garden the wife built for us in the backyard to keep us out of her flower bed. (hey they had nice ledges).

04-21-2006, 01:09 PM	#118
bigcat280 Newbie Join Date: Apr 2006 Location: Springfield Posts: 9	Mt 1st 1:6. Just paint done for now. More mods to come.

04-21-2006, 01:48 PM	#119
bigcat280 Newbie Join Date: Apr 2006 Location: Springfield Posts: 9	A buddy of mine wanted me to post his 1:6 up. All he has done is put an Avalanche body on it. He is planning on doing a tummy tuck on it tonight, so I will have more pics soon.

04-22-2006, 09:41 PM	#120
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	just finished painting and re assembling her last night. i painted the: hood rear deck windsheild surround center console gauges shifters seats belts buckles headlights turnsignals steering wheel wheels and wheel "bolts" took some vids on my digi. only had a 128M card and it only takes like 20 seconds max. but i got a few on the card. i went easy on the obsticals cause i didnt want to get caught getting stuck on camera so its some easy crawlin. but cool none the less i think u can choose "origonal" size to get a better vid.. well i only have room to host 2 of the vids :( http://media.putfile.com/NYLINT-1 http://media.putfile.com/nylint-2 next i triangulated the rear shocks and ground all the limiting tabs front and rear and clearanced the arms....(rotozip bit in the dremel made this MUUUCH easier...) then it was time to scratch her up and get her dirty!!! Last edited by STANG KILLA SS; 04-23-2006 at 04:43 PM.

RCCrawler Forums

Thread: 1:6 scale Nylint rockcrawler photo gallery