Go Back   RCCrawler Forums > RCCrawler General Tech > Newbie General
Loading

Notices

Thread: tire help

Reply
 
LinkBack Thread Tools Display Modes
Old 12-11-2008, 06:56 PM   #1
Rock Stacker
 
Join Date: Nov 2008
Location: trenton
Posts: 54
Default tire help

i didnt know if i should put this in the tire and wheels section but oh well. im getting the new axial scale scx10 and putting 2.2 imex claw dawgs because they are the best look tires and i dont know what beadlocks will fit them that are cheap because maximizers dont fit very well on maxx tires so i figured they would be the same results with the 2.2 tires. i need help tell me what beadlocks i can get for 50-100 dollars
maxxed out is offline   Reply With Quote
Sponsored Links
Old 12-11-2008, 07:08 PM   #2
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

Those Maximizers will be too big for 2.2" tires.

There are plenty of vendors here that make 2.2 beadlocks that will be perfect for your application. They start out fairly cheap (Eritex ~ $65) and can get pricey (Vanquish ~ $120). If you read through some of the threads in the Vendor's Section, I am sure you will find something that suits your needs and your wallet.
JeremyH is offline   Reply With Quote
Old 12-12-2008, 03:46 AM   #3
Who's your Daddy-0!
 
Join Date: Mar 2008
Location: Augusta
Posts: 5,009
Default

Jeremy is right. Also check out Create a Crawler's B-Locks. They have some killer stuff Another vendor here is DNA. They make some really nice B-Locks for 2.2 as well. You have a ton of choices to chose from just make sure when you order your B-Locks that you choose the correct offset for what you are putting them on....Axial, Berg, Clod, Losi, ect......Good luck, and support our vendors
TattooKenny is offline   Reply With Quote
Old 12-13-2008, 03:51 PM   #4
Rock Stacker
 
Join Date: Nov 2008
Location: trenton
Posts: 54
Default

thank you guys =) i just need to know how to find the classifieds on here
maxxed out is offline   Reply With Quote
Old 12-13-2008, 04:31 PM   #5
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

Here are the rules of this forum:
http://www.rccrawler.com/forum/annou...t.php?f=30&a=8
Classifieds are the 5th set listed.

However, the Vendors forum is what is was referring to earlier. You should have no problem viewing that section.
JeremyH is offline   Reply With Quote
Old 12-13-2008, 08:11 PM   #6
Rock Stacker
 
Join Date: Nov 2008
Location: trenton
Posts: 54
Default

what are the vendors under?
maxxed out is offline   Reply With Quote
Old 12-13-2008, 08:27 PM   #7
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

Not the classifieds...

Click Here ----> http://www.rccrawler.com/forum/vendors-market/
JeremyH is offline   Reply With Quote
Old 12-14-2008, 06:36 AM   #8
Rock Stacker
 
Join Date: Nov 2008
Location: trenton
Posts: 54
Default

thanks
maxxed out is offline   Reply With Quote
Old 12-14-2008, 10:55 AM   #9
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

No problem. Just below that section, there are also different vendors that have been grouped into their own section. Some of those guys also make beadlocks.
JeremyH is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com