|
| LinkBack | Thread Tools | Display Modes |
03-12-2009, 11:30 PM | #1 |
Quarry Creeper Join Date: Feb 2009 Location: Richmond, VA
Posts: 379
| 4 Link Set Up Instructions or Pic Details
I am new to crawlers and need some help finding instructions on how to put a 4 link suspension on my Axial RTR. I have searched the fourm using 4 link and Axial and havent been able to find instructions on how to put the 4 link suspension system together. I have all the hardware I need I just am not sure where to put the spacers or how to set up the rear links so they dont rub against the shocks. I cant figure out how to get the upper links into position with the location of the servo. I have the plate that allows me to place the lower suspension on the inside of the frame, if that helps people with the information they are going to provide. If anyone has detailed instructions or a picture board showing how to put the 4 link system together I would appreciate your help with this situation. Thanks in advance. |
Sponsored Links | |
03-13-2009, 06:10 AM | #2 |
On the lookout for Rocks Join Date: Mar 2006 Location: Monroe, Louisiana
Posts: 3,711
| |
03-13-2009, 07:23 AM | #3 | |
Quarry Creeper Join Date: Feb 2009 Location: Richmond, VA
Posts: 379
| Quote: Should my rear links move side to side (they wiggle in their brace) and if so how much and if not how to I fix the problem? | |
03-13-2009, 12:23 PM | #4 |
I wanna be Dave Join Date: Jan 2009 Location: By a lake in Thornton
Posts: 2,218
|
check out the thread on squat vs. anti squat. gives you the guideline to set your suspension and linkage up proper. Anti Squat and Suspension Tech i had to read it 3 times before it all made sense |
Thread Tools | |
Display Modes | |
| |