|
| LinkBack | Thread Tools | Display Modes |
09-07-2009, 08:17 PM | #1 |
Newbie Join Date: Sep 2009 Location: roseburg
Posts: 36
| losi comp crawler no power
i just got my losi up and running i have the xcelorin sensored 17.5 esc combo 16t pinion and i have no forward power as soon as i hit the rocks it just dies out. any suggestions?
|
Sponsored Links | |
09-07-2009, 08:19 PM | #2 |
ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana
Posts: 4,343
|
Is your battery charged ?
|
09-07-2009, 08:32 PM | #3 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
|
X2 on the battery.
|
09-07-2009, 09:08 PM | #4 |
RCC Addict Join Date: May 2008 Location: Chicago/Bloomington
Posts: 1,505
|
16T pinion is too large in my opinion. I find a 12 or 13 is better. Does the motor continue to run after the crawler stops? If so then the slipper is slipping. It seems that some were built without a slipper pad on both sides. |
09-07-2009, 09:25 PM | #5 |
Newbie Join Date: Sep 2009 Location: roseburg
Posts: 36
|
yea my battery is charged all the way i think. i put it on the charger with the balancer and the charger said full. its not acting like it is slipping i will pick up a smaller pinion tomorrow. reverse works great its just forward that not right i have tried all the settings on the apqc and nothing seem to change.
|
09-07-2009, 09:32 PM | #6 |
Rock Crawler Join Date: Apr 2009 Location: Saint Charles
Posts: 732
|
I run the 17.5 system in my losi with a 13t pinion and a 2cell lipo and it works great. Have you hooked it up to the computer? maybe the throttle limit is not on zero. what radio are you running? maybe the trim setting is set to a lower % Im just a newbe so I might be off on my ideas. I know when I went to my new radio I did not have any reverse and it turned out to me my reverse trim was set wrong Good luck |
| |