Go Back   RCCrawler Forums > RCCrawler General Tech > Newbie General
Loading

Notices

Thread: ESC recommendations for EVERYTHING

Reply
 
LinkBack Thread Tools Display Modes
Old 02-21-2010, 01:37 PM   #1
Newbie
 
Join Date: Feb 2010
Location: clarksville
Posts: 38
Default ESC recommendations for EVERYTHING

I am looking for a ESC that i can use for crawling and also i could maybe put is a slash 4x4? I am new to crawling so this may be a stupid question. I am basically looking for a ESC that would do good at crawling and also at fast speed racing. Any suggestions?
wkumale is offline   Reply With Quote
Sponsored Links
Old 02-21-2010, 01:43 PM   #2
Suck it up!
 
Duuuuuuuude's Avatar
 
Join Date: Mar 2008
Location: Arkansas
Posts: 11,652
Default

Mamba Max will do whatever you need it to.
Duuuuuuuude is offline   Reply With Quote
Old 02-21-2010, 01:57 PM   #3
Newbie
 
Join Date: Feb 2010
Location: clarksville
Posts: 38
Default

whats the diff between mamba max and mamba max pro? and i was told not to get the max becasue it didnt have bec? does that mean it has to have a separate battery? sorry am learning all this.

THanks
TJ
wkumale is offline   Reply With Quote
Old 02-21-2010, 02:12 PM   #4
Newbie
 
Join Date: Jan 2010
Location: UK
Posts: 6
Default

Mamba Max Pro will be the best sppedo for everything, add the external BEC with the speedo will give you everything you need
jaws is offline   Reply With Quote
Old 02-21-2010, 02:15 PM   #5
RCC Addict
 
Join Date: Jul 2009
Location: reelsville
Posts: 1,871
Default

The main difference's between the MM and MMP are that the MMP will do sensored brushless and has a 6s limit instead of 3s. The BEC in the MMP is adjustable but isn't stronger than the MM, Both will need a CC BEC added for a strong crawler servo. The MMP is probably the best ESC out for multiple uses.
indiana mudcat is offline   Reply With Quote
Old 02-21-2010, 02:16 PM   #6
Newbie
 
Join Date: Feb 2010
Location: clarksville
Posts: 38
Default

what about the Monster Mamba? Is that better than the Mamba Max? I know its good for fast stuff but what about crawling? COuld it be used?
wkumale is offline   Reply With Quote
Old 02-21-2010, 03:00 PM   #7
I wanna be Dave
 
Join Date: Dec 2008
Location: Madrid, IA
Posts: 2,015
Default

the mamab monster is more for the 1/8 scale 4s-6s lipo racers. one of the mamba maxes would be better suited for your needs
benoj is offline   Reply With Quote
Old 02-21-2010, 03:54 PM   #8
Rock Crawler
 
Join Date: Jan 2005
Location: The Hills
Posts: 630
Default Do I have to run lipos?

All these brushless motor/esc combos say 5s,6s etc when it comes to how many cells or voltage they can run. It doesn't really matter what kind of batts I use right? After all, voltage is voltage no matter what it comes out of.
terrible is offline   Reply With Quote
Old 02-21-2010, 05:07 PM   #9
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

Quote:
Originally Posted by terrible View Post
All these brushless motor/esc combos say 5s,6s etc when it comes to how many cells or voltage they can run. It doesn't really matter what kind of batts I use right? After all, voltage is voltage no matter what it comes out of.
Correct. The only thing you have to watch out for are the ESCs that wont support a lipo. Lithium Polymer batteries can not be run completely dry like traditional batteries. ESCs that support lipo batteries typically have a low voltage cutoff to keep lipo packs from dropping below 3.0V/cell and possibly causing damage to the battery.
JeremyH is offline   Reply With Quote
Old 02-21-2010, 05:43 PM   #10
Suck it up!
 
Duuuuuuuude's Avatar
 
Join Date: Mar 2008
Location: Arkansas
Posts: 11,652
Default

Quote:
Originally Posted by JeremyH View Post
Correct. The only thing you have to watch out for are the ESCs that wont support a lipo. Lithium Polymer batteries can not be run completely dry like traditional batteries. ESCs that support lipo batteries typically have a low voltage cutoff to keep lipo packs from dropping below 3.0V/cell and possibly causing damage to the battery.
You also need to be sure that the battery you use is capable of handling the load you place on it. Lipos can do very bad things when overworked. NIMH & NICD don't have these problems, but are heavier and not as efficient.
Duuuuuuuude is offline   Reply With Quote
Old 02-21-2010, 06:14 PM   #11
Rock Stacker
 
Join Date: Nov 2009
Location: Drumheller
Posts: 79
Default

I agree with the mamba max, i have one and i use it in my scale truck with a 35turn brushed motor in the winter, then swap it to my stampede in the summer with the 5700 KV brushless motor it came with in the kit. just reprogram it for the brushless and turn off the drag brake.

the internal bec works fine for a scale truck but when run in my comp crawler on 3s it overheated a few times and shut down on a 9 min course. but on 2s ive never had it shut down.

great all round esc and its in a reasonably small package. also very adjustable.
racerjim is offline   Reply With Quote
Old 02-21-2010, 08:33 PM   #12
Newbie
 
Join Date: Feb 2010
Location: clarksville
Posts: 38
Default

guys thanks for all the help... .... once agian though could someone explain the pros and cons the mamba max pro vs the mamba max.. thanks to all..
wkumale is offline   Reply With Quote
Old 02-21-2010, 08:48 PM   #13
dnf
 
rock hard's Avatar
 
Join Date: Sep 2009
Location: Under a big fkn rock.
Posts: 1,901
Default

I like the tekin fxr.

however I witnessed a honcho with a mamba max pro with a 12t on 6s
and it was BAD AS$.

so I would say go with castle.
rock hard is offline   Reply With Quote
Old 02-21-2010, 09:48 PM   #14
Rock Crawler
 
Join Date: Mar 2008
Location: 920 Valley of the Fox
Posts: 768
Default

A sidewinder is not a bad choice either, can do pretty much everything a MMax can & is a little cheaper than a Mamba max.

Both are good choices but get a casle link right away too.
R/CMaxximus5.0 is offline   Reply With Quote
Old 02-22-2010, 06:10 AM   #15
I wanna be Dave
 
Join Date: Feb 2009
Location: 20 miles southeeast of downtown Sacramento
Posts: 2,373
Default

Quote:
Originally Posted by wkumale View Post
guys thanks for all the help... .... once agian though could someone explain the pros and cons the mamba max pro vs the mamba max.. thanks to all..
The MMpro will handle up to 6s and run sensored. The MM is only good for 3s and non-sensored. 6s is twice the power and senored is smoother at low speed (crawling).
http://www.castlecreations.com/produ...a_max_pro.html
oldhippie is offline   Reply With Quote
Old 02-22-2010, 07:31 AM   #16
Newbie
 
Join Date: Feb 2010
Location: clarksville
Posts: 38
Default

hey old hippie thanks for the link....
wkumale is offline   Reply With Quote
Reply

Tags
esc




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com