|
| LinkBack | Thread Tools | Display Modes |
08-07-2010, 11:59 PM | #1 |
Rock Crawler Join Date: Aug 2009 Location: Thomasville, NC
Posts: 904
| plezz help will they fit?
Will integy's alloy 8h wheels fit on a scx 10? part # c22793 thanks sorry it was in the wrong spot! Last edited by NEW YORK BOY; 08-08-2010 at 01:07 AM. |
Sponsored Links | |
08-08-2010, 01:18 AM | #2 |
Who's your Daddy-0! Join Date: Mar 2008 Location: Augusta
Posts: 5,009
|
That wheel is for a Tamiya. If you remove the hex off the SCX10 they should work. That wheel uses the pin on the axle that holds your hex now. I don't know what the offset will be though. If I remember right that wheel comes with several different offsets so you can get the offset you want. I would suggest going with one of the vendors on here and getting a good set of bead locks. With the wheel your looking at you will need to glue your tires if you don't want them to slip. Go with a vendor on here daddy-0 |
08-08-2010, 01:20 AM | #3 |
Rock Crawler Join Date: Aug 2009 Location: Thomasville, NC
Posts: 904
|
Thanks much!
|
Thread Tools | |
Display Modes | |
| |