|
| LinkBack | Thread Tools | Display Modes |
01-15-2012, 08:54 AM | #1 |
Newbie Join Date: Jan 2012 Location: Canada
Posts: 8
| Night Crawler MRX 3000 troubles
Hi everyone . I've just taking a bite of the addiction. I just bought a new Losi night crawler and really enjoyed my first hour of use. Seems i've run into a problem on day two when i was planning on taking it too the beach. ( beaches in Newfoundland where i am from are prime rock crawlers spots, full of rocks) . Anyways it seem the receiver isn;t working right. The green light is never on and won't steer or drive. I tried rebinding it and the green light flickers a little and seems to be giving power to the servo but then when i take the bind key out and restart i'm back to square one. Nice day here again to take it out for a real test drive but here i am stuck indoors bring to figure out what happened. Thanks for taking the time to read this and any insight would be great. |
Sponsored Links | |
01-15-2012, 09:08 AM | #2 |
Newbie Join Date: Jan 2012 Location: Canada
Posts: 8
| Re: Night Crawler MRX 3000 troubles
its seems also when i do the rebind . while the bind key is left installed i operates fine but once i take the key out and restart nothing works. Is it safe to run the crawler with the key left in it?
|
01-15-2012, 09:37 AM | #3 |
Newbie Join Date: Jan 2012 Location: Canada
Posts: 8
| Re: Night Crawler MRX 3000 troubles
I have also just noticed that after I turn it all on with still no luck with the receiver coming on. after about 3-4 mins it just all of a sudden comes on and working fine until i turn it off .
|
01-15-2012, 10:11 AM | #4 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: Night Crawler MRX 3000 troubles
Did you check TX batteries? Is the rig pack fully charged? Loose connections to the ESC or RX? |
01-16-2012, 01:30 PM | #5 |
Newbie Join Date: Jan 2012 Location: Canada
Posts: 8
| Re: Night Crawler MRX 3000 troubles
i have brand new batts . All connections seem fine. After i rebinded it nothing worked but then after a few mins the green light came on and everything worked perfect until i turned it off and on again. Then i was back to square one .
|
01-17-2012, 01:11 PM | #6 |
Newbie Join Date: Jan 2012 Location: Canada
Posts: 8
| Re: Night Crawler MRX 3000 troubles
I found the issue while on hold with horizon hobbies. Turn's out it was in fact the Tx remote control . I took the cover off the bottom and rolled around the batteries and sure enough it worked. I place a napkin to keep the batteries nice and tight and seems to have fixed the issue. Thanks for the reply's |
Night Crawler MRX 3000 troubles - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MRX-3000 with BEC? | MRCCRAWLER1.9 | Losi Mini-Rock Crawler | 3 | 10-09-2010 06:18 AM |
Mrx 3000 | BansheeManiac | Electronics | 2 | 12-24-2009 09:35 PM |
Thread Tools | |
Display Modes | |
| |