Newbie questions about my Emaxx
 

What run time could i expect on a 3000Mah Ni-MH battery with the evx converted to one bettry and using on integy 55t lathe motor? also geared down with 72 spur and 9 pinion.

on an e-maxx

Are you running bearings? Any weight in the tires? How heavy is the crawler? What size tires, etc? You should be able to get at least 1/2 hour, maybe up to an hour. It all depends on your set-up.

pretty muh what im doing is building the "how to build a maxx crawler" but only the top part before it says "if u wanna fab stuff and spend money" I was wondering what the run tim on that would be?

i'm running a evx, 55t, bearings, 2.2 moabs with weights in the front, 87 spur 11 pinion with my tlt and i get about 40 min with a 3000mah ni-mh.

ok..so im lookin at at least 30 minutes of run time then....thats pretty good...

which motor for emaxx crawler?
 

What motor should i run (by its self) off of one battery on an evx for an e-maxx crawler. The crawler has 72/9 spur and pinion. I know a 55t is good, but they are sold out, so what are the advantages/disadvantages of a 45t and 65t motor? I want a lot of torque.

If you want alot of torque, go with the 65t. You won't have much wheelspeed though.

what if i went with the 65t and a 70/9 instead of 72/9?

who is sold out of 55t? i believe axiom has a bunch of them in stock. http://www.axiommotors.com/rock-craw...507d75524de8b3

i usually only order from tower hobbies...they're out atm

so would the 65t with a 70/9 instead of a 72/9 work? or would i want sumpin more like a 70/10?

ok i ordered the 65t integy lathe motor and a 70t spur and both 9t and 10t pinions off tower. Ill see which one I like better.

Why?

idk... lol id rather gt all my stuff in one plac and sav on the shipping... for a mtoor, gears, and a servo shipping was 3 dollars lol