|
| LinkBack | Thread Tools | Display Modes |
06-22-2013, 05:32 AM | #1 |
Newbie Join Date: Jun 2013 Location: Marysville
Posts: 48
| RC4WD winch question... Newb!
So this is prob an easy question for most but I don't understand it.. I am looking in to a rc4wd winch without remote... So ill need a 3 position 3rd channel... Soo here's my question... Do I have a 3 position 3rd channel? I'm running a spektrum dx4s.... Sorry if this is stupid! |
Sponsored Links | |
06-23-2013, 09:09 AM | #2 |
Rock Stacker Join Date: Jun 2013 Location: chillicothe
Posts: 56
|
All you have to do is check the other channels and see if they have two other positions besides the neutral (off) position.
|
06-23-2013, 09:34 AM | #3 |
Rock Crawler Join Date: Nov 2011 Location: clarksville,ar
Posts: 794
|
Do youhave the manual for the radio? That will tell you, also you could do a search for what you need to know. I think the dx4s has 3 position 3rd and 4th channels. -sent from my smarter than me phone |
06-23-2013, 02:17 PM | #4 |
Rock Stacker Join Date: Dec 2010 Location: Orangevale
Posts: 75
| Re: RC4WD winch question... Newb!
Correct me if I am wrong but the 4 in DX4S means 4 channels. So yes you have 3 channels.
|
06-23-2013, 03:05 PM | #5 |
Rock Stacker Join Date: Jun 2013 Location: chillicothe
Posts: 56
| |
06-23-2013, 03:28 PM | #6 | ||
Proverbial threadkiller Join Date: Feb 2011 Location: Central Wisconsin
Posts: 1,453
| Re: RC4WD winch question... Newb! Quote:
Quote:
Even if C & D are two position switches, there's still a couple options. HeyOk has a winch controller for two position switches. Or, another option is it looks like you can commandeer your A & B switches and use one of those. I run all my throttles at '0' trim and don't generally need to adjust them, so I'd snag the A switch (if that's your current throttle trim) and use that switch for your winch. | ||
06-28-2013, 12:45 PM | #7 |
Newbie Join Date: Jun 2013 Location: st louis
Posts: 39
| Re: RC4WD winch question... Newb!
I have a traxxas TQI from a summit and was wanted to use the locker channel but I don't know if it would work
|
07-18-2013, 08:49 AM | #8 |
Newbie Join Date: Jul 2013 Location: Louisville
Posts: 2
| Re: RC4WD winch question... Newb!
I just hooked up a bulldog winch to my dx3c. It works but in neutral position the winch is still running slower speed but it is still running. Is there anyway to set neutral position to 0v on the DX3c or is there an adjustment on the winch controller in the wiring? My only other option is to splice in a toggle switch, I really don't want to do that it takes away from the realism factor.
|
07-18-2013, 09:54 AM | #9 |
Newbie Join Date: Jul 2013 Location: Louisville
Posts: 2
| Re: RC4WD winch question... Newb!
NM.. I found the fix. went into the Sub Trim function for the AUX (Ch3) Had to set it to around H57 before it would stop running |
07-28-2013, 01:27 AM | #10 |
Newbie Join Date: Jun 2013 Location: Marysville
Posts: 48
| Re: RC4WD winch question... Newb!
Thanks for the help on here guys I did figure it all out
|
RC4WD winch question... Newb! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rc4wd winch question | mikeman84 | Electronics | 3 | 04-16-2013 10:20 PM |
RC4WD Bulldog winch question | jeepscx10 | Electronics | 2 | 02-02-2013 02:51 PM |
3ch rc4wd winch question | turbotron | Electronics | 1 | 09-29-2012 11:28 AM |
not a newb but have a question of newb stature | Brandon88 | Electronics | 11 | 04-14-2010 08:53 PM |
Newb question to beat all newb questions | vinster888 | Newbie General | 3 | 12-29-2009 07:24 PM |
Thread Tools | |
Display Modes | |
| |