| |
12-14-2014, 11:56 AM
| #1 |
| Newbie Join Date: Sep 2014 Location: Bunrsville
Posts: 8
|  servo arm
I am looking for a good servo arm I can use to have even steering on my gelande 2....the left side has a sharper turn then when I turn right...I used a stock servo arm..also tried to adjust everything on the servo and on the controller...I always end up having the same problem...I greatly would appreciate any suggestions
|
|  |
| Sponsored Links | |
| | |
|
12-14-2014, 12:37 PM
| #2 |
| Quarry Creeper Join Date: May 2014 Location: Burlington, ON Canada
Posts: 327
| Re: servo arm
Are you saying it turns sharper to the left than to the right? This should be easily adjustable on the transmitter. 1. Ensure the servo horn is installed as close to the mid-point of travel as possible 2. Zero transmitter values for trim and end points 3. Adjust trim 4. Turn each direction as far as possible 5. Adjust end points accordingly |
|
| |
|
12-14-2014, 03:13 PM
| #3 |
| Newbie Join Date: Sep 2014 Location: Bunrsville
Posts: 8
| Re: servo arm
Thank you...I will check that out
|
|
| |
 |
servo arm - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Servo armīs | _micro_ | RC4WD Bully | 6 | 09-24-2010 01:42 PM |
| Servo Arm Snapped...new servo? | evanthrax | Losi Micro-Rock Crawler | 7 | 12-13-2009 04:18 PM |
| Servo Arm | CKBentley | Axial AX-10 Scorpion | 6 | 08-24-2009 05:33 PM |
| |
Linear Mode
