moa motor esc

[J21]

I think between my lhs, reading, and parts descriptions I am missing something. So on a moa set up I have been told lhs I can run one esc that will run dual motors but I have also been told that those esc set ups to run dual motors don't work well. Then I have seen Novak m2 dig esc set up stating this is capable of running two motors so you don't need two esc's. I have read that If you have a capable transmitter that you would run two esc's and don't need a dig set up. I would just like some information and opinions on how this is supposed to work and be set up, from members who have experience running these set ups. thanks

[nerby149]

The best way is to run a dual esc set up, most guys run crushed castle sidewinder's or holmes hobbies offers a dual crushed br mini with bec all in 1 package. The novak electronics are not good for moa crawlers and you will need a 4 channel remote to handle the dig and burn functions. Good luck.

[J21]

Is that a four channel transmitter in general or only if your using the Novak systems. I am planning on by buying a software updated flysky.

[J21]

So the two esc set up eliminates the need for a dig unit.

[cboggs]

The 2 esc's are your dig with a 4 channel radio, and stay far away from the Novak setup!

[KJ10]

Go read the stickies in the super section. Not being mean or anything; there's just a lot of good info there.

[crawlhog]

DO NOT buy the novak , waste of cash. (comes with many customer complaints
also if your not comping an ESC that controls both motors work s fairly well.

Im still using one and never had an issue. its 4 yrs. old and used constantly