|
| LinkBack | Thread Tools | Display Modes |
08-20-2018, 03:40 PM | #1 |
Newbie Join Date: Jul 2018 Location: South
Posts: 7
| How unlock rr10 currie ar60 diffrential ?
Well, I ran my just put togther rr10. It seems bit stiff. It locks up as i release throttle. Gusse that's good stick to side of rock. I normally just like run around a dirt track I built. I read about unlocked and locked , but can't find the how to do so. If someone could explain how unlock. I installed 43/13 in front I think and 38 /13 in rear. I can't reamber, but its way most folks here have done it. Thanks |
Sponsored Links | |
08-20-2018, 03:42 PM | #2 |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: How unlock rr10 currie ar60 diffrential ?
I think what you're talking about is the drag brake. Do you mean the wheels stop turning immediately after you release the throttle? Sent from my SM-G960W using Tapatalk |
08-20-2018, 05:39 PM | #3 |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| Re: How unlock rr10 currie ar60 diffrential ?
Underdrive goes in back, not front.
|
08-20-2018, 05:52 PM | #4 |
Newbie Join Date: Jul 2018 Location: South
Posts: 7
| Re: How unlock rr10 currie ar60 diffrential ? Yes , wheels stop. The bugy will just about flip over . I thought unlocked and locked differentials had somthing do with it.
|
08-20-2018, 05:56 PM | #5 |
Newbie Join Date: Jul 2018 Location: South
Posts: 7
| Re: How unlock rr10 currie ar60 diffrential ? |
08-20-2018, 06:33 PM | #6 |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: How unlock rr10 currie ar60 diffrential ? |
08-20-2018, 06:35 PM | #7 | |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: How unlock rr10 currie ar60 diffrential ? Quote:
Sent from my SM-G960W using Tapatalk | |
08-20-2018, 07:17 PM | #8 | |
Newbie Join Date: Jul 2018 Location: South
Posts: 7
| Re: How unlock rr10 currie ar60 diffrential ? Quote:
I just pluged in battery, for few mint for slow run. See if or what was going on, I gusse I'll half set up mamba x. Haven't gotten that fare yet. I did check gearing , it's 43 /:13 in rear. Thankfully. | |
08-21-2018, 06:56 AM | #9 |
RCC Addict Join Date: Jan 2007 Location: Arkansas
Posts: 1,775
| Re: How unlock rr10 currie ar60 diffrential ?
Drag brake is what is getting you. Mamba X has the ability to turn it on and off using your radio if you have a spare channel available. Its the plug with the white wire. You just have to set it up with the link. If you cant do that, you could just lower the strength on your drag brake or turn it off all together if you aren't crawling it.
|
08-21-2018, 07:53 AM | #10 |
I wanna be Dave Join Date: Jul 2005 Location: North Idaho
Posts: 3,647
| Re: How unlock rr10 currie ar60 diffrential ?
Are you wanting the truck for a crawler, or U4/KoH (fast) style truck? If you are going after a crawler, you want the over/under diffs and drag brake. If you are wanting a U4 style rig, then you want to turn off the drag brake and go with the same ratios in both axles (maybe go a little under in the back). |
08-21-2018, 08:26 AM | #11 | |
RCC Addict Join Date: May 2015 Location: Price Twp.
Posts: 1,291
| Re: How unlock rr10 currie ar60 diffrential ? Quote:
I did not know that, thank you for mentioning that, that will really change some things for me. | |
08-21-2018, 05:37 PM | #12 | |
Newbie Join Date: Jul 2018 Location: South
Posts: 7
| Re: How unlock rr10 currie ar60 diffrential ? Quote:
It's built now. I drove it about ten mints today, it really feels like it would clime. Seems bit stiff to. Maybe shorter shocks would help the tumbling over? It's knot stopping as harsh today. I loosened up slipper clutch. Had remove housing. The Robison set up was rubbing housing plate . It's kinda pain work on. Got remove cage to do work. Install cage hold it up, test out what you done. Back an forth | |
08-28-2018, 11:00 PM | #13 | |
I wanna be Dave Join Date: Feb 2017 Location: My mothers basement
Posts: 2,128
| Re: How unlock rr10 currie ar60 diffrential ? Quote:
for the tumbling. The weight on the bomber is high, and I try to keep the center of gravity down low by adding weight to the axles. This can get expensive. Also there are torsion bar kits for the rear that will help with left turns. lso | |
Thread Tools | |
Display Modes | |
| |