09-26-2019, 02:51 PM | #1 |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| First crawler
Hi I'm new in the crawler part of rc. Normally I'm more of a basher/racer kinda guy but never competition. Recently I went to my first short course track and I liked that. So maybe I'll get into that more as well. But I'm looking into crawling for something less breaky kind of rc. There's a bmx parcours in the woods not far from my home which is fun to do with speed, but I'd like to do it slowly as well. Unfortunately I don't have that kind of vehicle. I'm also looking for something to run around in my backyard. I used to have a t2m pirate pigmy which I used more for crawling than anything else. I even built a course and everything. If you want to, you can see it on youtube. But now I want something a bit more purpose built for that. I really would like to have a MOA because I like the look and the versatility of the two motors and dual steering. The problem is availability. I live in Belgium and they only have a few MOA crawlers available. Here in the shop or through internet purchases. First I was looking at the rc4wd bully 2. But 800 euros is a bit much or even more if I would buy the kit and accessories. So I started looking at little crawlers. The only real moa's are practically non existing. I found the basher rocksta for around 86euros. The rest are not moa's but look a bit like them: Ecx temper gen 2 for 159euros. Ecx barrage doomsday for 219,99euros. G-made rock buggy kit for 299,99euros. And the losi night crawler for 299,99euros. Which one of these would be nice to have? What are the downsides? Is there a lot of tuning to be done to make them decent? Should i try to put one together from parts? I don't want to spend a ton of money unless you would say the cheaper ones are not worth the money. I would like to go up steep hills and big rocks and maybe a track in the back yard. Thanks in advance! |
Sponsored Links | |
09-26-2019, 03:34 PM | #2 |
Rock Crawler Join Date: Mar 2019 Location: Terrassa
Posts: 981
| Re: First crawler |
09-26-2019, 04:49 PM | #3 |
Quarry Creeper Join Date: Jun 2016 Location: Grand Rapids
Posts: 376
| Re: First crawler
I think the most capable of the crawlers you listed is the Losi Nightcrawler, but I can't tell you a lot else about it as I don't own one. Did you look into the exceed mad torque? That is a budget MOA that is available here at least.
|
09-26-2019, 11:16 PM | #4 | |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Quote:
But at first glance I am only able to buy it through ebay or amazon. Which means it's probably going to be taxed to get it imported into europe' I'll check it out to see if I can't find it in Belgiim or the EU. | |
09-26-2019, 11:17 PM | #5 | |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Quote: | |
09-27-2019, 01:13 AM | #6 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: First crawler
The Axial Capra.... Probably as close to comp/scale as you can get.... not a MOA, but should be comparable to a Shafty when set up properly.... |
09-27-2019, 05:21 AM | #7 | |
Rock Crawler Join Date: Mar 2019 Location: Terrassa
Posts: 981
| Re: First crawler Quote:
You have to be clear on your budget to get a decent answer | |
09-27-2019, 07:15 AM | #8 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,288
| Re: First crawler
maybe look at the old clod buster its moa but has a scale body that dosent mean it has to stay that way might be a cheaper option for you and lots and lots of info about it and the parts are still around to make it anything you want the only real down side is its vary old teck but hay it might fit the bill
|
09-27-2019, 07:46 AM | #9 | |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Quote:
And it looks pretty good. The price is 379euros, but I'm wondering if it wouldn't be better to go all out then for a bully 2 kit and build one like that. The kit is around 650 euros but I have no idea if it is capable enough for that kind of money. | |
09-27-2019, 07:47 AM | #10 |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler I don't have a budget. (I can go very high) But I don't want to spend like 1100euros if something cheaper has the same crawlability. Especially because I'm not really doing competition.
|
09-27-2019, 07:49 AM | #11 | |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Quote:
| |
09-27-2019, 08:49 AM | #12 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,010
| Re: First crawler For "crawlability", I'd really recommend the brand new Axial Capra as has been mentioned previously. With the portal axles and the dig function, it will make short work of most any obstacle. It should make its way to European retailers shortly!
|
09-27-2019, 10:33 AM | #13 | |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Quote:
it's for sale in november. 379euros. What does the dig function do? looks like you need a spektrum mini servo for it. | |
09-27-2019, 11:01 AM | #14 |
Quarry Creeper Join Date: Nov 2015 Location: US
Posts: 456
| Re: First crawler |
09-27-2019, 11:50 AM | #15 | |
Rock Crawler Join Date: Mar 2019 Location: Terrassa
Posts: 981
| Re: First crawler Quote:
Gmade R1 ...no doubt ! GMADE 1/10 R1 ROCK BUGGY 4WD CRAWLER READY-TO-RUN | Elektro Cars | RC Cars | Ingo´s Modellbaushop Last edited by themountain; 09-27-2019 at 11:53 AM. | |
09-27-2019, 12:43 PM | #16 | |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Quote:
If the electronics were better on the temper gen 2 i would buy that. But the small battery and 2 in 1 esc receiver annoys me a bit. I'm not really a fan of the looks of the capra, but there is a lot to do about this car. Why is that? Which is better? The capra or the r1? I really like the look of the r1 though. If it really is that good and can go up against the capra I would maybe go for that. Would it hold up against a full on bully 2? :P this is the most difficult choice I have ever made with regards to an rc. | |
09-27-2019, 12:55 PM | #17 |
Pebble Pounder Join Date: Feb 2013 Location: Fountain Hills Arizona
Posts: 106
| Re: First crawler
Hey Bennie98, Hello from the USA... IMHO you should be looking at one of the Axial Cage built rigs like the Bomber, both a rock racer/basher and a decent crawler and can go fast too. My son in law has one and it is a lot of fun. Next up is the Wraith, I have one of these that I built from the kit. I've had it 8 years now and it's still going strong. It too can be a rock racer/basher and go fast but I like to go slow and drive with finesse over obstacles. Both of these come RTR(ready to run) or as kits for you to build and are considered 2.2 rigs for the size of the wheels and tires. They have great suspension articulation and were designed and built from the real 1:1 off road buggies. The new Capra has yet to come out and will be in kit form so you build it adding your own steering and dig servos, ESC and motor and radio as well as wheels and tires. Again these are a cage type rig and have body panels exception is the Wraith Spawn addition. Now if you want to go with a full on body type, say you have a truck or car style you really like and want to make one, go with, and there are several real good ones with excellent support with after market parts, rigs like the Axial SCXII, Traxxas TRX-4, Team Associated Element Enduro, RC4WD they have many vehicles and a MOA one too, Redcat Gen8, pricey but awsome Vanquish VS4-10 Pro, the manufactures go on and on but these would be the most supported and hold up well to all you can throw at them. Aftermarket bodies of all types are available to build your own rig as well as motors, wheels and tires, shocks, winches and scale accessories galore. You Tube is a wealth of information on anything RC. Big thing too is battery and chargers there are many type of these and like LIPO batteries require some knowledge to safely handle these if you are going to use them. Do some research on a vehicle and pick one that suits your style and go have fun! |
09-27-2019, 01:20 PM | #18 |
Newbie Join Date: Sep 2019 Location: Belgium
Posts: 34
| Re: First crawler Hi thanks for your input. The bomber looks cool but I already have a Tekno mt410 and a couple of Tamiya's. So I'm not looking for scale/trail kinda cars or bashers. I want something special. Like the r1 or the capra or a moa. Preferably a moa. But the r1 looks nice as well. Or maybe the exceed mad torque if I can find it somewhere in europe.
|
09-27-2019, 03:00 PM | #19 | |
Rock Crawler Join Date: Mar 2019 Location: Terrassa
Posts: 981
| Re: First crawler Quote:
Bully 2 is a different animal because its a MOA...and way more expensive.Its a competition crawler ...you dont want/need that..you look somewhere else. Thats the one I build for myself [IMG][/IMG] Last edited by themountain; 09-27-2019 at 03:07 PM. | |
09-27-2019, 09:43 PM | #20 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,288
| Re: First crawler |
Tags |
ecx, g-made, losi, night crawler, temper |
First crawler - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
** Crawler Innovations ** 8 x 8 Crawler Hauler * continuing build thread; pic heavy | Nova's Ark | Multi Axle Rigs | 50 | 11-30-2019 10:02 AM |
Losi Micro Crawler Crawler-X SMC Plus Chassis Plus A Ton Of Stuff See Video | stomper4x4.com | Losi Micro-Rock Crawler | 5 | 05-14-2012 01:31 AM |
TCS - Novak Goat Crawler Systems in stock @ TCScrawlers.com - The Crawler Store | kevinlongisland | Vendors Market | 0 | 09-14-2007 09:34 AM |
TXT Crawler.... Stone Cold Crawler... Full Tube Scale build | RockSpyder | Tamiya Txt-1 and Juggernaut | 6 | 12-14-2004 09:40 AM |
| |