Some help with 1/18 Hobby Plus Pick up
 

hi folks. I have a Hobby Plus 1/18 Pick up and it has 4 light pods on a light bar that will take 3 MM LED lights. I want to add the 4 LED's and have a power bar (6 extra hook ups) that I have on my Feiyue 03 and wondered how to connect everything. The connector on the 1/18 that powers the 4 lights already on the rig is 2 pin that are 1 mm apart and are too small to work on the power bar from the 1/12 rig.
Can anyone offer some advice to how to connect the 4 extra lights that I want to add to the 1/18 rig?
What size and what is the connector called that fits into the combined ESC/Rx
already on my rig? Also the wires from the combined ESC/Rx are smaller than the wires on my 1/12.
I am new to this so I need some advice to do what I want to do.
Any help is appreciated.
Regards
Tar :)

Re: Some help with 1/18 Hobby Plus Pick up
 

CR-24 Electronics Combo w/ESC, Servo & Motor from hobbyplus will surely help.

Re: Some help with 1/18 Hobby Plus Pick up
 

dont mess with hooking anything else to that esc thats a good recipie for browning out your electronics pick up a external bec for your powered accessorys and you wont burn anything up
best to pick up some little red jst plugs to to wire every thing up with
if for any reason you dont feel comfertable doing your own wireing you can contact hayok and he can build you a plug and play system to fit your needs