Upgrading my Noob Tool Set So I'm finally over my first tool kit, the Dynamite RTR start up set, and looking for suggestions on which direction I should go. Thanks in advance, cheers! |
Re: Upgrading my Noob Tool Set All I use is 2 different hex drivers...some loc tite...that’s about it lol. What all are you looking for? Sent from my iPad using Tapatalk |
Re: Upgrading my Noob Tool Set Quote:
|
Re: Upgrading my Noob Tool Set MIP screwdrivers and drill tips are the best Buy once, cry once |
Re: Upgrading my Noob Tool Set I bought generic ‘titanium’ ones on Amazon, paid more than the cheap set, less than the most expensive ones, and they do just fine. Gold color with black handles. Sent from my iPad using Tapatalk |
Re: Upgrading my Noob Tool Set Depending on how in depth you want to go in the hobby here are some of the tools I find handy. - a good set of hex drivers...many to choose from. - a good set of nut drivers...many too choose from. - a good X-acto knife. - a good pair of scissors. - sturdy tweezers. - small sturdy needle nose pliers and side cutters. If you plan on painting many lexan bodies then a pair of lexan scissors and a body reamer are pretty handy to have too. I don't use them often but a set of precision screwdrivers comes in handy once in a while and so does a set of mini files in various shapes/profiles. |
Re: Upgrading my Noob Tool Set MIP makes great tools, but thier warranty blows. Wera and wiha also make great tools, tend to last longer then MIP, but the 1.5mm in both brands have tiny handles. Protek Rc for me are the best. Full size handles, and the 1.5mm one has a thicker shaft then the others I listed and own. And you can replace the tips on the hand drivers. All of the ones I listed are good quality tools, I'd recommend protek 1st, MIP a close second and the German wera and wiha a close 3rd tie. Sent from my SM-G970U using Tapatalk |
Re: Upgrading my Noob Tool Set MIP hex drivers, esp. the 1.5mm and 2mm sizes. saved the rear end of my gen8, the MIP stuff is so sharp and tight I was able to beak loose screws I thought I had completely knackered. Milwaukee stubby ratchet driver is nice too for certain things. I found that cheap tools lead to more headaches than the tools themselves are worth. you don't need a full MIP set, they are pricey af but do yourself a big favor and get a couple of the most commonly used sizes. |
Re: Upgrading my Noob Tool Set Quote:
those sound super sweet! |
Re: Upgrading my Noob Tool Set I have sets of MIP and Protek hex wrenches. Both have really great tips that are sharp and withstand use/abuse. I give the edge to the MIP tools because I feel their handles are a little more comfortable in my hand. Sure, the MIP tools are a bit more expensive than others but, as others have said, you get what you pay for. They are totally worth it in my book. |
Re: Upgrading my Noob Tool Set Thanks for the suggestions folks. |
Re: Upgrading my Noob Tool Set I won’t buy MIP again. The tips on both the 1.5mm and 2.0mm snapped off clean. The 1.5 snapped backing out a blue threadlocked set screw on a wheel hex, and the 2.0mm doing the same thing with a screw pin on a driveshaft. Hunted my old cheap Integy ones out to finish the job and they’re back in the toolbox now. Lol. Might give the Proteks a try next time I buy any. I know heat treating metal too much can make it brittle and maybe I got a bum set, but not gonna buy those again. |
Re: Upgrading my Noob Tool Set Quote:
|
Re: Upgrading my Noob Tool Set I’m very very happy with my Vanquish drivers. Exceptionally better handles than my ProTek Tru Torques and the antiquated MIP yellow screw driver handles. Good heft and the bearing end cap can’t be beat. I’ve put the 1.5 through it’s paces changing ring gears and no issues. All tips are just as sharp as when I got them. I have a spare 1.5 tip if something goes haywire, so replaceable tips are a plus. |
Re: Upgrading my Noob Tool Set Quote:
|
Re: Upgrading my Noob Tool Set Quote:
|
Re: Upgrading my Noob Tool Set Quote:
Sent from my SM-G970U using Tapatalk |
Re: Upgrading my Noob Tool Set Quote:
|
Re: Upgrading my Noob Tool Set Im a bit of RC tool collector (Craftsman and harbor freight in 1:1 :lmao:) I have: Everything MIP makes except turnbuckle wrenches and couple misc drivers Everything Vanquish Makes Most of Locked Up Old school knurled Dynamites Old school Integy MIP are no doubt the best in fitment, you wont strip screws. I have never had durability issues, but i take care installing screws and heating to remove if loctite. Extended wrench times can get cumbersome being fluted. But thats where speed tips come in :mrgreen: Vanquish as mentioned is absolutely amazing and the bearing cap is fantastic when really laying down screws. Most comfortable without question. Again, no durability issues, but I have seen other have problems especially with the 1.5 tips. Locked up, I started with their scale tools and picked up some others. very nice feel like the dynamites (again the old ones) and very affordable for the quality. I will place tips in the VP handles for assembling beadlocks with lots of screws though. Old school knurled dynamite, absolutely fantastic. I only have the basic metric and standard set, but I like how short they are, pretty much round with a little extra grip and I think their tips are the same as MIP in tolerance. These things have not let me down in what seems like 15 years maybe. Integy.... Another 15+ yr old set. The handles are typical integy quality as the tips dont point straight but they hold lol. The tips though, are actually very impressive in how they hold a tight fit in screws and dont round out. Im not sure what youre wanting to spend but great drivers are not that expensive. I use MIP daily just because I have them and a cool stand i made :lmao:. Vanquish is mostly because ill collect almost anything that says Vanquish because im a "fanboi", but the handles are amazing. Locked up is used for scale hardware duties. Dynamite and integy are small sets for camping and hitting the trails...... Hope that helps. I dont have experience with any others except Losi which I would not recommend. |
Re: Upgrading my Noob Tool Set I have a Wiha hex driver and it works very well. Has the spinny end so I can hold it in one hand and spin with my fingers. |
All times are GMT -6. The time now is 12:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com