RCCrawler Forums - Diff Output & Transmission Angles

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Newbie General (http://www.rccrawler.com/forum/newbie-general/)

- - Diff Output & Transmission Angles (http://www.rccrawler.com/forum/newbie-general/627565-diff-output-transmission-angles.html)

swerv512

12-29-2021 07:58 AM

Diff Output & Transmission Angles

Still scratching my head on my first ground up build. I feel like every little step forward only brings about a lot of questions. I'm using a 2.low on a v3 GSpeed with TRX4 portals.

At rest (full droop?), how much should I worry about making the trans output and the diff output parallel. The 2.low outputs are quite high compared to the stock TRX4 single speed transmission outputs.

Sent from my SM-G973U1 using Tapatalk

islandlife

12-29-2021 10:39 AM

Re: Diff Output & Transmission Angles

They dont need to be at the same elevation, just same angle compared to level

swerv512

12-29-2021 10:49 AM

Re: Diff Output & Transmission Angles

Quote:

Originally Posted by islandlife (Post 6103059)

They dont need to be at the same elevation, just same angle compared to level

That makes sense. My caster was all wacky trying to point the diff output up and towards the transmission output.

Sent from my SM-G973U1 using Tapatalk

All times are GMT -6. The time now is 06:25 PM.