|
| LinkBack | Thread Tools | Display Modes |
01-17-2022, 07:23 PM | #1 |
Newbie Join Date: Feb 2016 Location: MPLS
Posts: 10
| SCX10 wide XC10 mod beef tubes using stock SCX10 c-hubs/knuckles
Found there are some wide beef tubes to add some track to the SCX10, but most assume I want to upgrade to the larger Wraith/XR c’s and knuckles. Is there a kit I can install to just make my axles wider using all stock bits except longer shafts? I see the extended wheel hexes, but I don’t want to screw up the scrub by giving my wheels extreme offset. |
Sponsored Links | |
01-17-2022, 07:49 PM | #2 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: SCX10 wide XC10 mod beef tubes using stock SCX10 c-hubs/knuckles
You really want the stronger, and sharper steering, XR universal joint. Plus the XR style knuckles/chubs have about 8* of kingpin inclination, helping reduce scrub radius.
|
01-17-2022, 07:56 PM | #3 |
Newbie Join Date: Feb 2016 Location: MPLS
Posts: 10
| Re: SCX10 wide XC10 mod beef tubes using stock SCX10 c-hubs/knuckles |
01-18-2022, 06:30 AM | #4 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,288
| Re: SCX10 wide XC10 mod beef tubes using stock SCX10 c-hubs/knuckles
toss those knucles the og scx10 is so week the xr mod is a must for anything beyond a bone stock rig as far as i know there is no way to make a og scx10 axle wider with out using wraith knucles and chubs even if you could.make a axle exstention you still need shafts for them and no one makes extended scx10 shafts so unless you can make axle shafts also your stuck scx10ii axles are better if you want to make the swap but not any wider there is a xrmod axle housing outhere thats already to go but there not cheap and your still replacing axles you could narrow some ar60s but thats a nother axle swap |
01-18-2022, 12:27 PM | #5 |
Rock Stacker Join Date: Mar 2020 Location: Bay area
Posts: 63
| Re: SCX10 wide XC10 mod beef tubes using stock SCX10 c-hubs/knuckles
you can do it, but it is not cheap. you need 2 AR 60long side universals, but you cant reuse what you have. you need to upgrade the knuckles and C's
|
SCX10 wide XC10 mod beef tubes using stock SCX10 c-hubs/knuckles - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
In Stock - New Beef Tubes Beef Shanks for SCX10 II! | RPP Hobby | RPP Hobby | 0 | 11-28-2017 01:04 PM |
So What Do We Think? Beef Tubes Wide XR Mod | Pushjerk | Axial SCX10 II | 10 | 11-12-2017 09:08 PM |
| |