Manual for 2.4GHz 3 Channel radio

[Pat M]

? I have a Redcat RS10xt with 2.4GHz 3 Channel controller, problem is the small booklet that came with it barely gave enough information to bind it.

Is there a site/ PDF manual that explains all the screen channel (+/- %) , which one is which, and 4 little trim adjustments.

This is my first digital and esc setup, i've only used old sticks with manual slide adjustments.

[drywallguy]

There is a 2 channel manual here. Manuals

[Pat M]

? not much there (just the super basics of binding & pulling the throttle trigger makes the car go forward/reverse & steering wheel steers the car

[Pat M]

kind of like this page 3 & 4 : http://gelandetruck.com/images/produ.../XR4-Radio.pdf

but geared toward my controller

[drywallguy]

Sorry, I didn't read it.
This may or may not help Looking for a Lansu transmitter manual
Try a search in electronics for Lansu. ( If that's what your's says on it. )

[Pat M]

That one is it and perfect - :( but in German - HA!!!!!!

getting there, thanks guys

[Charlie-III]

Full rig manual.... Rockslide RS10 Manual


Rig review (with some additional info)... Redcat Racing Rockslide RS10

Similar request for info.... Looking for a Lansu transmitter manual

I would try the German version and translate using Google, Babelfish, etc.

[Pat M]

Thank Charlie III

Been translating the German one - best one yet

Even the early Rs10 manual that you posted first is a lot better than the one that came with the Rs10xt

[Charlie-III]

Originally Posted by Pat M

Thanks Charlie-III

Been translating the German one - best one yet

Even the early Rs10 manual that you posted first is a lot better than the one that came with the Rs10xt

Glad to help.

From the linked manual, I saw it was a Lansu 3TD TX, I tried searching from there. Not a lot to find, but just trying to flesh out this thread for the next guy.

Would you go back to the 1st post and put "Lansu 3TD" in the thread title? I believe you need to be in advanced to do it.

PS, saw your PM, thanks. No problem on the help, many here do the same thing.

[Charlie-III]

Any progress?

[Grizwald3600]

hey i cant get my radio to bind even though ive tried all the required steps... Help?

[RootBreaker]

Originally Posted by Grizwald3600

hey i cant get my radio to bind even though ive tried all the required steps... Help?

5y late i know...

but i found the manual
old thread but i found it... cuz i needed it
https://dealer.redcatracing.com/manu...-2013-7-25.pdf


I had to bind mine too.. wasnt bad as i googled it and found a video.

you turn micro on with bind button pressed...
turn controller on with holding the red SEL button and it will put controller in bind mode. done