| |
12-25-2007, 06:58 PM
| #1 |
| Newbie Join Date: Dec 2007 Location: Magalia
Posts: 41
|  anyone with 3 speed tanny? im planin to get a 3 speed tanny. wats a good servo for a 3 speed? what else do i need for havin a 3 speed? do i need a 5 channel radio? |
|  |
| Sponsored Links | |
| | |
|
12-26-2007, 05:44 AM
| #2 |
| Newbie Join Date: Apr 2007 Location: Norwich; UK
Posts: 7
| I have an F350 High Lift, for the gear shift I just use a standard servo, it does the job no prob's. As for the radio gear, from what I have learnt over the past year, any 3 channel and above will work. A Traxxas TQ can be modified, the 2 stage togle switch can be changed to a 3 stage, enabling 3 speed shift. But... to get the best adjustability you need a 4 channel because of trim adjustment for the shift servo. |
|
| |
|
12-26-2007, 07:55 PM
| #3 |
| Quarry Creeper Join Date: Mar 2006 Location: PORT ORCHARD WA
Posts: 238
| Any cheap standard servo will work. I use a JR126MG for my Hilux and f350 but thats just a littler overkill!!!  This link is all you need http://www3.towerhobbies.com/cgi-bin...&I=LXZV41&P=ML hope this was usefull |
|
| |
|
12-26-2007, 11:30 PM
| #4 |
| Rock Crawler Join Date: Apr 2007 Location: portland
Posts: 584
| The tq3 has a little adjustment knob on the back that is used for 3rd channel trim. I modded my tq3 for 4 wheel steering for free (no need for a 3 position switch). Its so simple on the old style tq3's. But yes the 3rd channel on a tq3 can be adjusted. I use it to align my rear wheels.  |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
