07-07-2010, 10:15 AM | #1 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
| 1:6 Mustang Drifter
Did not plan on building this anytime soon, but a buildoff on Scale4x4 lit a fire, been staring at it for the last 3 days eagerly awaiting to start some mods. All i have to start is the body, i will acquire parts as money allows. Parts list: Axial Rear Axle Emaxx trans Maxx Front Suspension 2.8 wheels and street tires 3/4" square tubing to make c-channel frame Electronics: Spektrum Rx Hitec 5645 for Steering Mamba Monster Max :drool: Starting pics, got excited and started tearing it down before i wrote up the paper haha. With everything installed. Paint ideas, first pic is tiny, sorry. Dug out some old t-maxx parts. Pulled the whole front bulk assembly. Chopped the shock tower, wanted to leave the bottom part as a brace. Lower Arm, New hinge pin holes, 30mm narrower then stock. Choppy chop Top arm, same as bottom, 30mm off both ends. Stock on the left, Holy Camber on the right. Finished hack job front end, slapped on some 2.8 wheels i had layin around. As long as i get a set with the same offset as these ill be golden !! Perfect !! Hood teaser, more on this later First of several layers and sanding to make my Cowl. As of today Bout half way done with my COWL hood :banana: On layer #4 of .060 styrene, probably 4 more to go. |
Sponsored Links | |
07-07-2010, 12:15 PM | #2 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
|
Other than the mustang body it's gonna be sweet. I can't wait to see this thing drive. |
07-07-2010, 12:51 PM | #3 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
| |
07-07-2010, 01:26 PM | #4 |
Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado
Posts: 3,622
|
must admit - never seen a 1:6 drifter.. ill be watching for updates on this one!
|
07-07-2010, 01:51 PM | #5 |
Rock Stacker Join Date: May 2010 Location: canvey island essex
Posts: 81
|
is gonna look a treat spesh that big aswell
|
07-07-2010, 01:58 PM | #6 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| |
07-07-2010, 02:37 PM | #7 |
RCC Addict Join Date: Nov 2005 Location: Kansas
Posts: 1,280
|
Looks awesome, I'll be watchin this for sure I would vote for the first paint idea, but really, you'd have to resonably match those wheels for it to be perfect... |
07-07-2010, 03:04 PM | #8 |
Rock Crawler Join Date: Sep 2009 Location: In West Monroe,LA...yes,where Duck Dynasty is filmed
Posts: 687
|
Gonna watch this one,but what are you going to use as 1/6 scale drift tires,im guessin PVC pipe,but i dont want to ruin the ending ,so if it is a secret,I understand |
07-07-2010, 07:40 PM | #9 |
Rock Crawler Join Date: Sep 2009 Location: Abbotsford BC
Posts: 563
|
mcd (a company that makes large scales) has some firmer tires that can be good for drifting.
|
07-07-2010, 07:44 PM | #10 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
|
Thanks for the comments guys. Ill probably just mod up some PVC tires for the rear to drift, most of the time it will sport some IMEX soft road tires to race with. As for the rims, theres not a HUGE selection in 2.8, with Jato offset, but i did find some that look similar to BULLIT style wheels, so ill probably get those in chrome and black out the centers. |
07-07-2010, 07:45 PM | #11 |
Rock Stacker Join Date: Dec 2007 Location: Santa Rosa, CA
Posts: 98
|
I say the third paint scheme. Good color combo there.
|
07-07-2010, 08:06 PM | #12 |
Rock Crawler Join Date: Aug 2009 Location: Thomasville, NC
Posts: 904
| That's coooooool!!!! |
07-07-2010, 09:39 PM | #13 |
I wanna be Dave Join Date: Jun 2006 Location: Here
Posts: 2,319
|
I have that same body sitting in my garage. I'll finish mine in about 2 years at the rate I'm going.
|
07-09-2010, 05:31 PM | #14 |
Rock Crawler Join Date: Jun 2010 Location: Forsyth County, Georgia
Posts: 617
|
I love a good stang, always have. I think you should go with the black and silver two tone design
|
07-09-2010, 07:27 PM | #15 |
Pebble Pounder Join Date: Dec 2009 Location: salina,ks
Posts: 151
|
thats going to be a great looking scaler, i like the red with black color scheme
|
07-09-2010, 08:16 PM | #16 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
|
Thanks guys, no real updates the last couple days other then some minor work on the hood. Waiting to have some funds to get some parts. |
07-13-2010, 12:55 PM | #17 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
|
Stuck on the hood, thought about smoothing everything out and leaving it, or... add some more layers to bring the trailing end up a little more. Whatcha guys think ? Last edited by ScalerLover; 07-14-2010 at 11:57 PM. |
07-14-2010, 11:57 PM | #18 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
|
Seems i ran out of ABS cement Also whipped up a nice low profile drift wing. Wing is still very rough, edges need rounded and whatnot. |
08-30-2010, 07:25 PM | #19 |
I wanna be Dave Join Date: Jun 2006 Location: Here
Posts: 2,319
|
Month and a half and no updates. Hmm I havent taken any pics of mine but mine is pretty much a roller.
|
08-30-2010, 09:06 PM | #20 |
Rock Crawler Join Date: Dec 2008 Location: Marengo, Ohio
Posts: 980
|
No updates man, money is slow and i have a newborn baby Girl as of Aug 20th so all my projects are getting canned for now.
|
| |