my sweet flm, bl pede

[Jo Mama]

just ask questions, i dont even want to start typing everything on there lol

[rambuller84]

Left wheel drive only? I bet it's slow too

[joecrawler]

I see it is a mamba max but which one, I was looking at going brushless with my Pede.

[cvecmaxx]

looks nice, but you are going to want a swami bar in the rear to protect that motor

www.swami-rc.com

http://www.swami-rc.com/ordering

[Jo Mama]

Originally Posted by cvecmaxx

looks nice, but you are going to want a swami bar in the rear to protect that motor

www.swami-rc.com

http://www.swami-rc.com/ordering

already have one these were pics a fw days after christmas


and yeh i was going to use the flm dog bones but needed ext rear arms and i didnt get them so just use the stock shafts they do hold up tho

and for bl YES!!! mamba maxx 5700kv and mines on 8 cells just punch controll at 70% but it still will wheelie at 30+ mph

[Bam Bam]

That looks it will kill the cars you race and do a massive wheely !

[Brandon M]

shiny as ever I want it... Want a emaxx instead?

[1BadJeepBruiser]

I need a sick ESC/ BL set up for my sand rail...can thats system handle 12 cells? I wan my sand rail to pull wheelies and roost sand like 15-20 feet and do like 35

[Jo Mama]

Originally Posted by 1BadJeepBruiser

I need a sick ESC/ BL set up for my sand rail...can thats system handle 12 cells? I wan my sand rail to pull wheelies and roost sand like 15-20 feet and do like 35

yup it will do 12 cells..

i was wheelie well it has soo much power if u floor it full gas it will burnout wheelie and it shot a rock a someones car and it got stuck in the side its about 3/4's of an inch in there SORRY....

and no man id rather have this pede any day for me its a better basher because its ligter stronger and less over all money compared to a all flm bl maxx

[Jo Mama]

oh and it will do more than 34 on 7 cells... it will do 40+ on 7 cells in a pede with maxxed settings.

i run a 8 cell pack with all setting on low so i get the same power as 7 cells on the middle setting but more runtime

and bam bam lol it kills every car so far.. a lst2 a 1/8th scale buggy (a few) and a t maxx, savvy, and revos.... and it will do wheelie at any speed really, just hard to controll them

[skellyo]

Originally Posted by 1BadJeepBruiser

I need a sick ESC/ BL set up for my sand rail...can thats system handle 12 cells? I wan my sand rail to pull wheelies and roost sand like 15-20 feet and do like 35

The MM 4600 can handle 12 cells, but not the 5700...at least not without potential motor damage from exceeding the rated specifications of motor RPM. Also, when running 12 cells on the MM ESC, you must disable the BEC and either use a UBEC or Rx pack. Also, 35mph will be easy to do with 12 cells on a 4600.

[Jo Mama]

Originally Posted by skellyo

The MM 4600 can handle 12 cells, but not the 5700...at least not without potential motor damage from exceeding the rated specifications of motor RPM. Also, when running 12 cells on the MM ESC, you must disable the BEC and either use a UBEC or Rx pack. Also, 35mph will be easy to do with 12 cells on a 4600.

no it will, just not wot for a long time... i have hooked up 12 just to see what it will do and it was FAAAAST but got hot fast..... i wouldnt run 12 imo 8 is waaay more than enough but its his setup... and skellyo, dont u have a flm pede? at rc monster? or is that someone else?

[skellyo]

Originally Posted by Jo Mama

no it will, just not wot for a long time... i have hooked up 12 just to see what it will do and it was FAAAAST but got hot fast..... i wouldnt run 12 imo 8 is waaay more than enough but its his setup... and skellyo, dont u have a flm pede? at rc monster? or is that someone else?

Yep, I did. This one:
www.onelouds10.com/flm_pede1.jpg
I ended up parting most of it out recently. With my recent addiction to crawlers and my BL E-Maxx build, I just didn't think I'd drive it much. With the money from the sale of its parts, I've now got 3 TLT's in the works, 2 of which are BL.

[Jo Mama]

Originally Posted by skellyo

Yep, I did. This one:
www.onelouds10.com/flm_pede1.jpg
I ended up parting most of it out recently. With my recent addiction to crawlers and my BL E-Maxx build, I just didn't think I'd drive it much. With the money from the sale of its parts, I've now got 3 TLT's in the works, 2 of which are BL.

hey are u sing the flm dog bones??? wel was?

and that is bad azz!!! i like the look of those wheels and tires

[skellyo]

Originally Posted by Jo Mama

hey are u sing the flm dog bones??? wel was?

and that is bad azz!!! i like the look of those wheels and tires

I was using the regular length a-arms, so I used MIP CVD's. The tire/wheel combo was RPM Stablemaxx Titans with Panther Komobo tires. I used the maximizer stampede to maxx adapters to mount them. Now I just need to find out what to do with them since they're really a bit small for my maxx.

[Unholy]

Originally Posted by Jo Mama

... it shot a rock a someones car and it got stuck in the side its about 3/4's of an inch in there

Let me be the first to raise the BS flag on this.

[Bomb-ProofProducts]

x2. If not, if must shoot a more powerful roost than a CR250...hmmm

[Jo Mama]

Originally Posted by Unholy

Let me be the first to raise the BS flag on this.

and im putting it down!!!

it was an old rusty as crap ford truck i would have take a pic but it was towed away the next day i went out to get one..

but wut ever dont believe me i dont give a crap

[4link4eva]

What smells like trainwreck?

[mikesativa]

I would recommend mounting the battery under the chassis. There is plenty of room there. Add a piece of plastic under the battery just in case.

Mike