Ballistic17's Exo Terra 2.0

[Ballistic17]

Originally Posted by patrickcogdill

How hard was it to put a Freqeskin in the Exo? It has so many angles/curves...

Sent from my XT1575 using Tapatalk

There were a few tricky spots. But I have done so many wraps for myself and others it's not to bad. Just have to take your time.

[Ballistic17]

More parts showed up today and installed.

[patrickcogdill]

Very nice. I need to get one of those yeti steering racks. I still have the old Exo version STRC made and it is nothing but problems. Looking great. Can't wait to see what else you do.

Sent from my XT1575 using Tapatalk

[Ballistic17]

Originally Posted by patrickcogdill

Very nice. I need to get one of those yeti steering racks. I still have the old Exo version STRC made and it is nothing but problems. Looking great. Can't wait to see what else you do.

Sent from my XT1575 using Tapatalk

Thanks. Yeah the steering is a lot tighter now. This should pretty much be it besides the Strong Arms Rc a-arms and maybe the VP bulk heads.

[Ballistic17]

VP bulkhead showed up. Very nice piece.

[Ballistic17]

Got a set of led's and some 3d printed lenses from Powershift Rc and put them in.

[c0bra]

That vp bulkhead looks sweet! I may have to pick one or 2 up.

Do they run the stock size bearings?


Sent from my iPhone using Tapatalk

[Ballistic17]

Originally Posted by c0bra

That vp bulkhead looks sweet! I may have to pick one or 2 up.

Do they run the stock size bearings?


Sent from my iPhone using Tapatalk

It sure is nice. The bearing on the inside is larger and outter one is stock size.

[Ballistic17]

Got my Strong Arm's RC Zeus II kit and started installing. Everything fit great with the VP bulkhead.

[Ballistic17]

Got some more parts today. Picked up a set of Hot Racing Wraith lockers to use in the rear and center diffs. They fit and worked perfectly. Put Boom Racing HD gears in the front and rear. Also put 100k diff fluid in the front. Also got the rear Strong Arm's RC Zeus II arms installed.

[OSRC]

Love my Exo, it's my favorite "go fast" Had to substantially mod the rear suspension to get it to handle, but now it jumps and handles as well as any 1/8 buggy.

Good to see one getting some love!

[c0bra]

I just picked up a used exo that is in desperate need of an entire rebuild. During the rebuild I’m wanting to beef it up and get rid of as many problems with them as possible.

If I remember right, just about all of the front suspension is shared with the yeti, but is there anything that’s shared out back, other than the entire diff?


Sent from my iPhone using Tapatalk

[Ballistic17]

Originally Posted by c0bra

I just picked up a used exo that is in desperate need of an entire rebuild. During the rebuild I’m wanting to beef it up and get rid of as many problems with them as possible.

If I remember right, just about all of the front suspension is shared with the yeti, but is there anything that’s shared out back, other than the entire diff?


Sent from my iPhone using Tapatalk

Yeah All the Yeti parts work on the front. But nothing for the rear.

[Ballistic17]

Picked up a set of different tires.