Traxxas UDR #ahbeef Just got my UDR from FEDEX today. Applied a couple enhancing touches to make it look a little more authentic. Figured I should take a pic before I run it because it is the best it is ever going to look, lol. https://farm1.staticflickr.com/895/3...53b5debd_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm1.staticflickr.com/896/2...d6677fce_b.jpgUntitled by JASON MCKIMMEY, on Flickr Nothing ground breaking, just some authentic logos. |
Re: Traxxas UDR #ahbeef Very nice! Traxxas crushed it with this truck. |
Re: Traxxas UDR #ahbeef There's going to be one of them on my shelf this summer! I can't wait until they get in stock online! Sweet looking truck btw. |
Re: Traxxas UDR #ahbeef Took it out to the farm and ran 2 4S packs through it. I had the stability management (TSM) knob at about 50%. It handled really well. I think the larger size makes it rotate slower so you can catch it easier. I did try turning the TSM down all the way and without any expo dialed into the steering it became a bit of a handful. I think I am going to keep it on 4S because it seemed to have plenty of power but not a ridiculous amount. Dusty pic below. I think it looks even better now. haha. https://farm1.staticflickr.com/790/2...9f9b57d0_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: Traxxas UDR #ahbeef That's bad ass. |
Re: Traxxas UDR #ahbeef And....the servo died....on vacation. Can anybody recommend a good fast servo in the 200 oz. in. range with a speed faster than .17? It comes with a 2075X which I think is the stock servo in the TRX-4. |
Re: Traxxas UDR #ahbeef There are likely faster ones out there, but the DS3218 meets the requirements, and is super-cheap, stronger than you mentioned, and has been working great since December for me in my heavy Ascender build: Brand: DS servo. Item: DS3218 20KG Large Torque Digital Servo. Stall Torque (5V): 19 kg/cm (263.8oz/in) Stall Torque (6.8V): 21.5 kg/cm (298.5 oz/in) Speed : 0.16 sec/60°(5V) / 0.14 sec/60°(6.8V) Operating Voltage: 4.8 ~ 6.8 DC Volts. Dead brand: 3μs. All metal gears, listed as waterproof... Available from many sellers for under $20 "thumbsup" |
Re: Traxxas UDR #ahbeef I went with a SAVOX SA-1256TG. Seems to be working pretty good in my test runs today. Dimensions(mm): 40.3x20.2x37.2 Weight(g): 52.4 Speed(@4.8V sec/60): .18 Torque(@4.8V oz-in): 222.2 Speed(@6.0V sec/60): .15 Torque(@6.0V oz-in): 277.7 Gear: Titanium & Aluminum Bearing: 2BB Case: Aluminum Spline: 25 Tooth It was a direct bolt in, no dremeling of the motor cover like with some others. FYI the BEC in the VXL-6s is a 10A 6.0 volt unit. |
Re: Traxxas UDR #ahbeef I got lights! Proline 6" LED kit. It is a little shorter than I would like but it will work. <a data-flickr-embed="true" href="https://www.flickr.com/photos/152932242@N02/42592610554/in/datetaken/" title="Untitled"><img src="https://farm1.staticflickr.com/841/42592610554_460798e005_b.jpg" width="1024" height="768" alt="Untitled"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script> <a data-flickr-embed="true" href="https://www.flickr.com/photos/152932242@N02/43310505681/in/datetaken/" title="Untitled"><img src="https://farm2.staticflickr.com/1789/43310505681_de34c5568e_b.jpg" width="1024" height="768" alt="Untitled"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script> <a data-flickr-embed="true" href="https://www.flickr.com/photos/152932242@N02/43260818552/in/datetaken/" title=" "><img src="https://farm2.staticflickr.com/1783/43260818552_aa25a5492b_b.jpg" width="1024" height="768" alt=" "></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script> |
Re: Traxxas UDR #ahbeef After much debating and having to cancel an order on a Baja Rey, ive got a UDR coming on tuesday. Cant wait to get it to some of the local bashing spots. Ive already got two 4S 6700 Traxxas packs ready to go. I went with the Savox 1270 which pretty much has the same specs as the one you used. I am wondering if its worthwhile to get a BEC so i can bump it up to 7.4v and take full advantage of it. |
Re: Traxxas UDR #ahbeef New tail lights from some place in Poland, lol. https://farm1.staticflickr.com/925/4...aa5b810f_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: Traxxas UDR #ahbeef Quote:
|
Re: Traxxas UDR #ahbeef Link to the taillights? Thanks! Sent from my Moto G (4) using Tapatalk |
Re: Traxxas UDR #ahbeef Quote:
https://www.ebay.com/itm/LED-Light-R...-/232763928773 |
Re: Traxxas UDR #ahbeef Ive ran 4 packs through it so far, tons of fun. Out of the box i replaced the Servo with a Savox 1270 and MFR aluminum upper links / trailing arms. Like everyone else, my shocks were leaking right out of the box. I tightened up the lower caps, but still leaked quite a bit after my first run. Traxxas is sending me rebuild kits for all eight. No other issues even with a lot of jumps. I'm only running it on 4S which is really fast... cant even imagine it on 6S. |
Re: Traxxas UDR #ahbeef Quote:
If it ever stops raining I'm going to take it to the in-laws house and run the make shift back yard track there with the GoPro on. |
Re: Traxxas UDR #ahbeef First attempt at loading video on Flickr. Not sure the quality is that great. Anyway, this is my Baja Rey on 2S with GoPro Hero 6 black with stabilization on and processed in Final Cut Pro X to stabilize it. Didn't turn out too bad and that is actual speed, lol. https://farm1.staticflickr.com/838/4...1f02d45d_c.jpgRace Track at the in-laws by JASON MCKIMMEY, on Flickr |
Re: Traxxas UDR #ahbeef Bump, been a while. Did some paint detail work on the back end. Also just sent an email to my amazing painter about doing a shelf body for this thing. Stand by for awesomeness. https://farm8.staticflickr.com/7927/...de429476_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm5.staticflickr.com/4883/...0847800c_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: Traxxas UDR #ahbeef New body fresh out of paint! https://farm5.staticflickr.com/4909/...7b7b8f61_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm5.staticflickr.com/4918/...c7883803_b.jpgUntitled by JASON MCKIMMEY, on Flickr https://farm8.staticflickr.com/7862/...af4317e2_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
Re: Traxxas UDR #ahbeef Here's a sneak peak of it mounted up. Got a few more decals to get in the mail and I will post some more finished pics. https://farm8.staticflickr.com/7856/...7b219081_b.jpgUntitled by JASON MCKIMMEY, on Flickr |
All times are GMT -6. The time now is 02:25 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com