Go Back   RCCrawler Forums > Miscellaneous > Non Crawler RC's
Loading

Notices

Thread: Slash to rzr conversion

Reply
 
LinkBack Thread Tools Display Modes
Old 12-05-2020, 06:57 PM   #1
Pebble Pounder
 
Join Date: Oct 2018
Location: Dayton
Posts: 105
Default Slash to rzr conversion

Here is a project Ive been tinkering with for the last month or so. Took my gen 1 slash and upgraded just about everything. Turned it into a scale-ish RZR side by side thanks to Jconcepts awesome side by side body. Used a ton if Proline, Traxxas, Specktrum, Boom Racing, Gmade& Rc4wd goodies to make this a reality. Wheels look odd at certain angles, but didn’t want to use 1.9 wheels.


Sent from my iPhone using Tapatalk
Short_Bus_Kustoms is offline   Reply With Quote
Sponsored Links
Old 03-04-2021, 09:45 AM   #2
Pebble Pounder
 
Join Date: Oct 2018
Location: Dayton
Posts: 105
Default Re: Slash to rzr conversion

After much thought. I realized that the MT tires were not only too small, but they really made the handling very tough. So without having to buy bigger wheels and tires, I found slightly larger 1.55 Irok SS. I must say, WOW. Not only are looks on point, but handling is insane. Sucker drifts on pavement and destroys dirt. Very impressed with the total build.


Sent from my iPhone using Tapatalk
Short_Bus_Kustoms is offline   Reply With Quote
Old 03-04-2021, 01:50 PM   #3
RCC Addict
 
Join Date: Jun 2006
Location: Here
Posts: 1,942
Default Re: Slash to rzr conversion

Looks a bit odd with the body up high, but that's easily fixed. Have you tried some 100mm 1.9 wheels to see what it looks like?

Yeah, slashes and soforth from traxxas accept other bodies well. I converted a stampede to 1/6 scale and put a new bright raptor on it.
Gula is offline   Reply With Quote
Old 03-05-2021, 12:54 AM   #4
Pebble Pounder
 
Join Date: Oct 2018
Location: Dayton
Posts: 105
Default Re: Slash to rzr conversion

Yeah I put my old trx4 tires on and it looked goofy. These new 1.55 fill the wells out better and still retAin a scale look.


Sent from my iPhone using Tapatalk
Short_Bus_Kustoms is offline   Reply With Quote
Old 03-06-2021, 06:45 AM   #5
Rock Stacker
 
Join Date: Feb 2021
Location: ERF
Posts: 68
Default Re: Slash to rzr conversion

Have you worked out what scale this would be? Technically it would be fairly "large" scale right?
SurlyBurly is offline   Reply With Quote
Old 03-06-2021, 09:58 AM   #6
Pebble Pounder
 
Join Date: Oct 2018
Location: Dayton
Posts: 105
Default Re: Slash to rzr conversion

I mean for 10th scale its too large for a “utv” so it probably would be in line with 1/6 cars in terms of actual size


Sent from my iPhone using Tapatalk
Short_Bus_Kustoms is offline   Reply With Quote
Old 03-26-2021, 08:16 AM   #7
I wanna be Dave
 
Join Date: Dec 2016
Location: san diego
Posts: 2,721
Default Re: Slash to rzr conversion

Good call on the tires, looks better.
Very cool project! I have a slash I picked up used. Can't figure out why I didn't sooner! They are a blast and TUFF!
Shinchu is offline   Reply With Quote
Reply



Slash to rzr conversion - Similar Threads
Thread Thread Starter Forum Replies Last Post
Yeti X conversion/ 4x4 slash??? Bugs Crawler Axial Yeti 1 12-03-2019 11:05 AM
Slash 4x4 Rally Conversion matgyver Rally 49 10-01-2015 10:50 AM
Slash 4x4 to Yeti Conversion Possible? deadbase General Crawlers 5 05-27-2015 02:43 PM
Slash 4Link-conversion rider762 Non Crawler RC's 15 02-23-2011 09:23 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com