Its 2022 and I'm Building an Exo 2 Attachment(s) Went down the discontinued Axial rabbit hole with leftover parts. Building an Exo Terra with Yeti cast offs, NOS, aftermarket and close other brand parts so I guess it'll be a DB Terra or Exo Pro... Wanted to have a use for all the plastic parts I pulled off my #1 Yeti that was built with all Vanquish and SSD parts... but was stolen around Christmas. And subsequently Yeti #2 that I built the same to replace it. Unfortunately everything exo specific is discontinued from Axial and finding used stuff thats good is challenging so it'll be an Exo chassis/drivetrain with easier to find body Attachment 399130 Would've been cheaper/easier to just buy a DB Pro roller but thats no fun... still a ways to go. Body and cage are a good fit though. Attachment 399131 STRC main chassis RPM F/R lower arms GPM diff cups/outputs F/R Axial HD Gears F/R 500k silicone in front diff Lockedup RC lunchbox R Locker (if axles blow then open with 500k fluid) Axial Center diff locker GPM Alloy Trans mount/driveshafts GPM F/R hubs GPM axles Need to draw up some chassis wings and rear shock tower to tie into the DB Pro hinge mount. Planning a 550 sized 3800kv brushless system on 3S. |
Re: Its 2022 and I'm Building an Exo Nice. I bought a used chassis years ago with no cage, put a Yeti front body mount in the back and ran an old f2fiddy body I had. It’s neat and fun with a big can motor. https://uploads.tapatalk-cdn.com/202...1f27ce4d96.jpg |
Re: Its 2022 and I'm Building an Exo 4 Attachment(s) Its a roller! Attachment 400908 Not terrible to tie the DB hinge to a yeti front shock tower in the rear front uses modified DB body posts on the front tower. Works really well. Attachment 400909 Attachment 400910 Attachment 400911 Currently setup with locked rear/center diffs, front has 500k wt fluid. Still need to draw up some chassis wings with battery holder since the plastic Exo parts are long discontinued. Put some cast off electronics in to putt around and its cool. The flip up chassis is 1000% better than a factory Exo for wrenching. Super pleased with it. |
Re: Its 2022 and I'm Building an Exo Nice. |
Re: Its 2022 and I'm Building an Exo Nice parts list....buggy looking good! |
All times are GMT -6. The time now is 10:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com