North Dakota Crawler Picture Archive
 

pictures of completed rigs only, please keep chit-chat to minimum8)


I know you guys got some sweet rigs so post em up, If you live in MN but occasionally crawl in ND go ahead and post your rigs up too"thumbsup"

These are the Crawlers I got laying around at the moment. I'll just edit this post as things change because if I don't I'll clutter this thread up with the way I change things around.

-Hilux is traded away
-Bronco X-Trail is traded away
-Sniper Chassis is traded away


Comp buggy

-Tube chassis by me
-Axial Trans and Axles stuffed with Bonus Line lockers with hardened ring and pinions
-MIP shafts
-RCP Knuckles up front with Axial CVDs and STRC Straight axle conversion in the rear
-Shocks are stockers with internal droop springs and external HPI WK springs
-Hitc 5645 servo with a Novak Crawler/55 combo to keep it company with a DX3R to contol it all powered by some MaxAmp 3s Lipos.
-Losi Claws on Axial black chrome rims with TCS rings and some 3mm hardware holding the extra 4oz in the front.

http://i42.photobucket.com/albums/e3...y/IMG_6442.jpg


Losi Mini Crawler

Weighted the front wheels

http://i42.photobucket.com/albums/e3...r/IMG_6728.jpg

Hera are mine...
 

My Comp truck...
Axles - TLT
Trans - AX-10
Wheels & Tires - Pro-Line, Losi Rock Claws
Chassis - By Me... Lexan
Body - Pro-Line C10
ESC - Novak Rooster Crawler
Motor - Integy 55 turn
Radio - JR XS3
Servo(s) - JR 650 steering... JR 590 dig
Dig- Yes... Home-made
http://i333.photobucket.com/albums/m.../trucks001.jpg

My Scaler...
Tamiya CR-01
Axles - Stock
Trans - Stock
Wheels & Tires - Stock
Chassis - Stcok
Body - Stock
ESC - Novak XRS
Motor - Stock
Radio - Spektrum DX6i
Servo(s) - HiTec 645 steering... HS55 Head & Tail lights
Dig - No
http://i333.photobucket.com/albums/m.../trucks003.jpg

the pig
axial axles
axial trans
custom made chassis by me
custom bumpers and rack by me
axial wheels
pl flat irons
lots of scale stuff
fishnet stockings
custom made topper me
velinion brushless 7 cell 4200
hitec 645 servo
soon to have nasty winch and new bumpers
http://img.photobucket.com/albums/v2...ff/thepig1.jpg


comp rig
axial axles and trans
del monte top banana
70mm links
custom upper link brackets by me
pl rims with hammer tires
integy 45t
tekin fx-r
hobbico cs 170
hacked beetle
http://img.photobucket.com/albums/v2...f/compbug1.jpg

Hey guys, I'm in Fargo. I just was pointed to this section by 701 Technique, I didn't even realize it was here:shock:, I'm tarded. Here are my two rigs, a Wheely King FJ and a RC4WD Hilux Trailfinder.http://i145.photobucket.com/albums/r...4/rearview.jpghttp://i145.photobucket.com/albums/r...4/DSC01800.jpg

sweet 701 rigs so far people"thumbsup"

Heres a couple of mine8)

FJ40
Proline Bushwacker
Stampede Trans and Shocks
Axial Axles
HPI Geolanders
http://i122.photobucket.com/albums/o...5thcomp092.jpg

The King
built by mriswith
Wheely King Axles and Trans
Custom chassis
Traxxas Shocks
http://i122.photobucket.com/albums/o...ose01Front.jpg
http://i122.photobucket.com/albums/o...Pose02Rear.jpg

more to come...

Here is my trail rig that I got from MRISWITH. Chassis is hand made by him as well as all the links. I put new stampede yokes and drive shafts in it and has been bullit proof eversince.

Specs:
Mriswith chassis
Proline Bushwacker body
Axial tranny & axles
Reedy 19 turn motor
MaxAmps 2cell 4200 battery
MambaMax speed control
JrPropo 8611a Steering servo

http://i258.photobucket.com/albums/h...0624081759.jpg

Scale Touches:
Roof rack made by me
Hand made bungees
Fire wood
Tow strap
Cooler
Sleeping bags by Dave
Toolbox by Dave
Gas can by Dave

http://i258.photobucket.com/albums/h...0619080018.jpg

Here are a few PICs From the last Month
 

This first PIC is of My (Jam1sstang) TLT from 7-15-08
http://i218.photobucket.com/albums/c...LT27-15-08.jpg


Here is a Pic of My (Jam1sstang) TLT with a change of Rims/Tires from 8-2-08
http://i218.photobucket.com/albums/c...Park8-2-08.jpg
Features:
Axles- TLT
Trans- Modified Stampede
Wheel/Tires- Pro-Line's Eight Shooter Beadlocs/Pro-Line's Flat Iron's
Chassis- Customcrawlerz TLT (Jam1sstang-OWNER
Body- Hummvee Urban
ESC- Rooster
Motor- INTEGY 55T


And Last A pic of (will have to put his screenname here) and Jam1sstang's TLTs from a Sertoma outing on 8-2-08
http://i218.photobucket.com/albums/c...Park8-2-08.jpg

The Blue Truck is also a Customcrawlerz chassis
Cantilever shock setup on this Rig though.
Running Pro-lines Eight Shoters with Pro-Line MOABS

Well I just couldn't resist getting in on the 1.9 thing. I just got a new Toyota Hilux on Friday and had to go wheel it a little bit yester day to see how she handles. So far I have done the body drop mod and the Chino spring mod to help with the flex. The narro stance takes a little getting use to after driving mostly comp rigs. Hopefully I will get paint on it this week and a set of 1.9 rock crushers.

http://i258.photobucket.com/albums/h...0831081843.jpg

http://i258.photobucket.com/albums/h...0831081845.jpg

http://i19.photobucket.com/albums/b1...4/P8170276.jpg
GC2
Axial trans w/VF Dig
11.1 2000 Mah Max-Amps Lipo
Meyhem Bead Locks
Pro-Line Hammers
4130 Axle Lockers
HR Shocks

http://i325.photobucket.com/albums/k...906081503a.jpg
Overkill"thumbsup"

http://i325.photobucket.com/albums/k...913081134a.jpg
Stock Losi 1/18 Crawler.:roll:

Here is my current tuber that I built this year. This was taken in Cali at Vasquez Rocks park.

http://i181.photobucket.com/albums/x...r/P7290014.jpg

Here is my savage x. This pic is from last year though. It is currently completely torn down and getting an extreme overhaul.

http://i181.photobucket.com/albums/x...er/Savx1-1.jpg

I have some other projects I will get pics of eventually.

Well guys, I have already posted pictures of this rig but thought we needed to give this thread a little bump.

I have been busy with this one since the last pictures I posted of it. I have got it painted along with a new Integy 45 turn motor and new HPI stock car wheels with RC4WD Rock Crushers mounted to them. Mad a couple new coolers for the back and got the spare mounted. According to Dave you can't have a scale rig without lights. So in went the lights. 12 to be exact. What a pain in the butt.

http://i258.photobucket.com/albums/h...0910082121.jpg

http://i258.photobucket.com/albums/h...0910082122.jpg

http://i258.photobucket.com/albums/h...0910082123.jpg

http://i258.photobucket.com/albums/h...0910082128.jpg

http://i258.photobucket.com/albums/h...0910082127.jpg

http://i258.photobucket.com/albums/h...0910082130.jpg

Newest Project

Tamiya CR-01
Pro-Line Scout Body
HPI Geolanders
Tekin Rebel II
Futaba FASST

See more pics here

http://i122.photobucket.com/albums/o...01Scout002.jpg

http://i122.photobucket.com/albums/o...01Scout005.jpg

http://i122.photobucket.com/albums/o...01Scout014.jpg

http://i122.photobucket.com/albums/o...01Scout020.jpg

This thread is getting stagnant so I'll post up my old builds. I'll start with from the beginning with my TLT's.

My original Misfit build. My Misfit builds all used the same axle mounted motor design. The pictures of it are down with the MIsfit 2.5 pics.

http://i42.photobucket.com/albums/e3...rightfront.jpg

Misfit V2.0

http://i42.photobucket.com/albums/e3...fitgen2012.jpg

Misfit V2.5 - I got rid of the first Misfit and a few months later was missing it. So I had to build another one. I built the second with TLT shocks just to prove a point. The divorced motor/GD-600 combo had zero torque twist. I also used the stock TLT chassis with out drilling any holes.

http://i42.photobucket.com/albums/e3...5profile01.jpg

This was the drive train on all my Misfit builds

http://i42.photobucket.com/albums/e3...n25motor04.jpg

http://i42.photobucket.com/albums/e3...n25trans04.jpg

FJ Scaler - I used the same drive line principle as the Misfit's. Worked great.

http://i42.photobucket.com/albums/e3...RiverRun01.jpg

http://i42.photobucket.com/albums/e3...torMount02.jpg

I was going to show my Wheely Kings builds but if you look up the page, you'll see the Green and White Escalade rolling on Masher 2k's, "The King". So I'll throw up my Axials. There's another Axial I won't bother posting. Again if you look up the page you'll see a black FJ with green accents sporting Geo's. Another one of my builds, although the bumper and roof rack was all Tony.

My very first Axial

http://i42.photobucket.com/albums/e3...ggy/gen101.jpg

Comp Axial with stock Chassis

http://i42.photobucket.com/albums/e3...ggy/gen201.jpg

TCS X-Trail Bronco

http://i42.photobucket.com/albums/e3...o/IMG_6404.jpg

I've been saving the best for last. Between the Comp Axial and the Bronco is about the time I started playing with the torch. I'll save those for another post.

Here's a little fleet snapshot from way back. Back when "The King" was my WK called Elvis, the Scorpion was new and I did my first Tube chassis with the last of my TLT axles. You'll notice the tube buggy had the same divorced motor/GD-600 thing as the rest of my TLT's.

http://i42.photobucket.com/albums/e3...origstable.jpg

very nice work jim. i wish i would of known you when you were getting rid of that tube jeep. do you know where it ended up?

Now I get to my tubers. I've started 9 of them but only finished 7 of them.

You ended up with 2 of my finished ones and 2 of the unfinshed. I've only done 2 Jeeps and you got the unfinished 2nd one. Gabe got the first one. He sold it off but not before he redid 90% of the tube work. He had with us at our first comp in Fargo last year.

My Sgt Rock was my first tube scaler. This was my last completed TLT rig.

http://i42.photobucket.com/albums/e3...ockPanel01.jpg

http://i42.photobucket.com/albums/e3...ockPanel02.jpg

My next one was my Jeep scaler with WK axles

http://i42.photobucket.com/albums/e3...2TestRun01.jpg

http://i42.photobucket.com/albums/e3...s2Roller02.jpg

Then I tried my hand at an Axial based comp tuber. This was my prototype. It lead to 3 other other comp chassis that I sold or traded off.

http://i42.photobucket.com/albums/e3...y/IMG_6382.jpg

I ended getting my orignal WK axles back and built another scale tube buggy. Everyone should remember the Sniper. Actually I started the build with Axial axles but the chassis ended up a tad bigger than I intended so I swapped in the WK units.

http://i42.photobucket.com/albums/e3...IMG_6756-1.jpg

This actually brings me up to date. The only crawler I have completed right now is my Losi MRC and thats pictured in my first post.

I think it was from a xxx-main buggy sticker kit.