Which JConcepts Ford Raptor SVT Body for SCX10? Just wondering if any of you knew which would be the best fit for an Axial SCX10 Honcho. I am looking at the JConcepts Ford Raptor SVT body, and while they are actual not made to fit the Axial chassis, I think I can get one to work well enough for my purposes. Here are the three options: Slash 2WD Body: http://www.jconcepts.net/store/index.php?main_page=product_info&products_id=336 Stampede Body: http://www.jconcepts.net/store/index.php?main_page=product_info&products_id=413 Revo 3.3 Body: http://www.jconcepts.net/store/index.php?main_page=product_info&products_id=392 I of course may be able to figure it out myself, but JConcepts doesn’t list dimensions on their website, and I am awaiting an email to see if they can provide that info to me. Any help would be greatly appreciated, as I figure that maybe someone has one of these bodies on hand and can check it out for me. Thanks! |
I dont own the truck but was looking to build a scaler based of the F-350 body. The slash body would be way wide and the pede body wouldnt have enough wheel base. From what it looks like is the bodies from the revo 3.3 would have the closest base to the 12.3" that the honcho runs |
I have the Ford Raptor for Revo 3.3 on a scale car. I've also e-mailed JConcepts for dimensions of the other 2 bodys, but no answer yet, except that the body for the Slash 2WD has the longest wheelbase. The 3.3 revo-body measures: Width at wheelarcs: 22 cm Wheelbase: 29 cm. The car is pictered at scale4x4 |
I have the raptor for revo 3.3 body and the wheelbase is 31.5cm. Perfect for un-modified honcho wheelbase "thumbsup" |
So you guys are telling that this body fits good on an SCX10? http://www3.towerhobbies.com/cgi-bin...?&I=LXZWX2&P=7 The Specs tells me that maybe is too long or am I wrong? Length: 508mm (20") Width: 274.65mm (9.75") at widest point Height: 140mm (5.5") Do you have a picture of this body mounted on your SCX? I need to see that cause I was looking a Raptor body for my SCX for a loooong time! |
Quote:
I would like the exact measurements of the Raptorbody for the 2WD Slash (#0084) if sombebody who have this body could take the effort of measure the body. |
Anybody here having the correct dimensions of the JConcepts Ford Raptor #0084 made for the Slash ???? Need wheelbase and width. |
does anyone know if the tamiya high lift ford f350 body will fit on an scx10 body? |
Quote:
|
So has anyone tried the body on a scx10 yet?? I was thinking about the 3.3 body or they have another one #0225 http://www.jconcepts.net/store/index...roducts_id=446 |
|
Is this the Jconcepts 0084 slash 2wd body? And is the chassis underneath the SCX10 or SCX10 Honcho? Also, if you already painted and mounted it, could you please post a pic? Thanks!"thumbsup" Quote:
|
Quote:
|
Slash bodies are huge. You could probably fit two scx10's under a slash body side by side.. |
Actually the Jconcepts 0084 body is designed to be more scale looking than a regular shortcourse body. They just call it the "2wd" body, prior to getting licensed by Ford to call it Raptor, it was the Gladiator. From what I have now heard this body should fit the 12.3 Honcho wheelbase pretty well."thumbsup" Quote:
|
Quote:
|
FORD RAPTOR SVT body on SCX10 Honcho - Jconcepts 0084 It's gonna work! Well, after another RCC member (thanks Kujo) showed me his build on Scale4x4rc.org using the Jconcepts Raptor for the Revo body, he advised methat the Jconcepts Slash 2wd (aka #0084) would fit almost exactly on the Honcho. So, I ordered up a body and he was right. It should turn out nicely. Here are some pics to show how it fits on the Honcho (WB = 12.3 inches). The #0084 wheelbase is around 12 inches, about 19.25 long, and about 8.5 wide at the fenders. The body is just placed on the posts right now, I would like it to sit a tad lower to be more scale looking. Hope this helps anybody that was wondering what would fit. Attached Images http://www.rccrawler.com/forum/attac...1&d=1297408310 http://www.rccrawler.com/forum/attac...1&d=1297408310 http://www.rccrawler.com/forum/attac...1&d=1297408310 http://www.rccrawler.com/forum/attac...1&d=1297408310 http://www.rccrawler.com/forum/attac...1&d=1297408310 |
That looks sick! I may have to build a Raptor "thumbsup" |
I wonder if you can use the stampede body cab in front of the honcho truggy frame? |
I was wandering around hobby people, and proline now has a scale size raptor body for the scx10, i brought mine in to make sure, it is a 13.3 wheelbase but is wide enough and the wheel wells dont look retarded like the jconcept bodies |
All times are GMT -6. The time now is 09:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com